Add device tree node for the first PCIe PHY device found on the Qualcomm
SM8450 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 ++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 16a789cacb65..a047d8a22897 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -558,8 +558,12 @@ gcc: clock-controller@100000 {
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- clock-names = "bi_tcxo", "sleep_clk";
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&pcie0_lane>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "pcie_0_pipe_clk",
+ "sleep_clk";
};
qupv3_id_0: geniqup@9c0000 {
@@ -625,6 +629,40 @@ i2c14: i2c@a98000 {
};
};
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x200>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_EN>,
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie0_lane: lanes@1c06200 {
+ reg = <0 0x1c06e00 0 0x200>, /* tx */
+ <0 0x1c07000 0 0x200>, /* rx */
+ <0 0x1c06200 0 0x200>, /* pcs */
+ <0 0x1c06600 0 0x200>; /* pcs_pcie */
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ };
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sm8450-config-noc";
reg = <0 0x01500000 0 0x1c000>;
--
2.33.0
