Re: [PATCH v2 07/10] arm64: dts: qcom: sm8450: add PCIe0 PHY node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 08, 2021 at 08:14:39PM +0300, Dmitry Baryshkov wrote:
> Add device tree node for the first PCIe PHY device found on the Qualcomm
> SM8450 platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 ++++++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 16a789cacb65..a047d8a22897 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -558,8 +558,12 @@ gcc: clock-controller@100000 {
>  			#clock-cells = <1>;
>  			#reset-cells = <1>;
>  			#power-domain-cells = <1>;
> -			clock-names = "bi_tcxo", "sleep_clk";
> -			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&pcie0_lane>,
> +				 <&sleep_clk>;
> +			clock-names = "bi_tcxo",
> +				      "pcie_0_pipe_clk",
> +				      "sleep_clk";
>  		};
>  
>  		qupv3_id_0: geniqup@9c0000 {
> @@ -625,6 +629,40 @@ i2c14: i2c@a98000 {
>  			};
>  		};
>  
> +		pcie0_phy: phy@1c06000 {
> +			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
> +			reg = <0 0x01c06000 0 0x200>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_0_CLKREF_EN>,
> +				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
> +			clock-names = "aux", "cfg_ahb", "ref", "refgen";
> +
> +			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> +			reset-names = "phy";
> +
> +			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
> +			assigned-clock-rates = <100000000>;
> +
> +			status = "disabled";
> +
> +			pcie0_lane: lanes@1c06200 {
> +				reg = <0 0x1c06e00 0 0x200>, /* tx */
> +				      <0 0x1c07000 0 0x200>, /* rx */
> +				      <0 0x1c06200 0 0x200>, /* pcs */

Oh, so this platform has "PCS" at the starting offset? This is different
compared to other platforms as "TX" always comes first.

And the size is "0x200" for all?

Thanks,
Mani

> +				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
> +				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
> +				clock-names = "pipe0";
> +
> +				#clock-cells = <0>;
> +				#phy-cells = <0>;
> +				clock-output-names = "pcie_0_pipe_clk";
> +			};
> +		};
> +
>  		config_noc: interconnect@1500000 {
>  			compatible = "qcom,sm8450-config-noc";
>  			reg = <0 0x01500000 0 0x1c000>;
> -- 
> 2.33.0
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux