Re: [PATCH v2 2/2] arm64: dts: sm8350: fix tlmm base address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 22 Nov 22:03 CST 2021, Vinod Koul wrote:

> On 22-11-21, 11:05, Katherine Perez wrote:
> > TLMM controller base address is incorrect and will hang on some platforms.
> > Fix by giving the correct address.
> 
> Thanks, recheck the spec this looks correct. We should have tlmm reg
> space here and not tlmm base which also contains xpu region (thus hang)
> 

Aren't you reading the patch backwards?

Afaict downstream the driver carries an offset of 0x100000, which we
dropped as we upstreamed the driver. As such changing reg to 0x0f000000
should cause most gpio register accesses to fall outside the actual
register window.

Or perhaps I'm missing something here?

Regards,
Bjorn

> Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
> Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
> 
> > 
> > Signed-off-by: Katherine Perez <kaperez@xxxxxxxxxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > index d134280e2939..624d294612d8 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > @@ -960,9 +960,9 @@ spmi_bus: spmi@c440000 {
> >  			#interrupt-cells = <4>;
> >  		};
> >  
> > -		tlmm: pinctrl@f100000 {
> > +		tlmm: pinctrl@f000000 {
> >  			compatible = "qcom,sm8350-tlmm";
> > -			reg = <0 0x0f100000 0 0x300000>;
> > +			reg = <0 0x0f000000 0 0x300000>;
> >  			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> > -- 
> > 2.31.1
> 
> -- 
> ~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux