The PM8226 PMIC has SPMI regulators on the PMIC SID 1: add the spmi vregs compatible to probe them. Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx> Signed-off-by: Dominik Kobinski <dominikkobinski314@xxxxxxxxx>> --- This patch is based on changes done in the following patches : - https://patchwork.kernel.org/project/linux-arm-msm/patch/20211118210210.160895-3-luca@xxxxxxxxx/ - https://patchwork.kernel.org/project/linux-arm-msm/patch/20211122235230.2467246-1-jm5112356@xxxxxxxxx/ - https://patchwork.kernel.org/project/linux-arm-msm/patch/20211123003256.2467776-1-jm5112356@xxxxxxxxx/ arch/arm/boot/dts/qcom-pm8226.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index 25780c8fa2e9..49c2fac6f287 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -62,6 +62,10 @@ pm8226_1: pm8226@1 { #address-cells = <1>; #size-cells = <0>; + pm8226_spmi_regulators: pm8226-regulators { + compatible = "qcom,pm8226-regulators"; + }; + pm8226_vib: vibrator@c000 { compatible = "qcom,pm8916-vib"; reg = <0xc000>; -- 2.34.0
