V2: - Adds Tested-by Julian Grahsl as indicated. - Fixes low-level noise checkpatch --strict I ended up having to push defines into static inlines for this. - Adds Reviewed-by Robert Foss. - Adds VFE/CSID fix for sdm845 as explicit additional sdm845 specific patch per Robert's suggestion. I took the time then to test out on sdm845 to ensure the new patch breaks nothing "./cam -c 1 --capture=1 --file=capture.raw" continues to produce expected data. Link: https://git.linaro.org/people/bryan.odonoghue/kernel.git/commit/?h=v5.16-rc1-sm8250-camss-imx577-only Link: https://git.linaro.org/people/bryan.odonoghue/kernel.git/commit/?h=v5.16-rc3-sm8250-camss-imx577-only-v2 git diff v5.16-rc1-sm8250-camss-imx577-only..v5.16-rc3-sm8250-camss-imx577-only-v2 -- drivers/media/platform/qcom/camss V1/RESEND: RESEND: git send-email --to=inux-arm-msm@xxxxxxxxxxxxxxx -> --to=linux-arm-msm@xxxxxxxxxxxxxxx This series is imported from excellent enabling work contributed by Jonathan Marek which we have picked up in Linaro for the RB5 project. Link: https://patchwork.kernel.org/project/linux-arm-msm/patch/20210511180728.23781-2-jonathan@xxxxxxxx/ Link: https://www.qualcomm.com/products/robotics-rb5-platform Link: https://www.96boards.org/product/qualcomm-robotics-rb5 Link: https://www.thundercomm.com/app_en/product/1590131656070623?index=1&categoryId=category0&tabIndex=1 The RB5 has a slightly different sku I think to Jonathan's platform - QRB5165 in our case with a different version of LK the relevant bootloader for the board. As a result we needed to make some additional updates to the provided patcheset, included here. The most notable changes are: - Addition of clocks. - Addition of bandwidth settings. - Representing the dependency on a VFE for a given CSID so that V4L subdevs will come out of reset right when poked. A full tree which is bootable and capable of producing pixel data from the imx577 main sensor is availble here, with this series being a sub-set of the necessary patches on the SoC side only. Link: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=v5.16-rc1-sm8250-camss-imx577-only media-ctl --reset media-ctl -v -d /dev/media0 -V '"imx412 '20-001a'":0[fmt:SRGGB10/4056x3040 field:none]' media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 Bryan O'Donoghue (3): media: camss: Add SM8250 bandwdith configuration support media: camss: Do vfe_get/vfe_put for csid on sm8250 media: camss: Apply vfe_get/vfe_put fix to SDM845 Jonathan Marek (16): media: dt-bindings: media: camss: Add qcom,sm8250-camss binding media: camss: csiphy-3ph: don't print HW version as an error media: camss: csiphy-3ph: disable interrupts media: camss: csiphy-3ph: add support for SM8250 CSI DPHY media: camss: csid-170: fix non-10bit formats media: camss: csid-170: don't enable unused irqs media: camss: csid-170: remove stray comment media: camss: csid-170: support more than one lite vfe media: camss: csid-170: set the right HALT_CMD when disabled media: camss: csid: allow csid to work without a regulator media: camss: remove vdda-csiN from sdm845 resources media: camss: fix VFE irq name media: camss: vfe-170: fix "VFE halt timeout" error media: camss: Add initial support for VFE hardware version Titan 480 media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW media: camss: add support for SM8250 camss .../bindings/media/qcom,sm8250-camss.yaml | 450 ++++++++++++++ drivers/media/platform/qcom/camss/Makefile | 3 +- .../{camss-csid-170.c => camss-csid-gen2.c} | 32 +- .../media/platform/qcom/camss/camss-csid.c | 56 +- .../media/platform/qcom/camss/camss-csid.h | 2 +- .../qcom/camss/camss-csiphy-3ph-1-0.c | 184 ++++-- .../media/platform/qcom/camss/camss-csiphy.c | 9 +- .../media/platform/qcom/camss/camss-vfe-170.c | 12 +- .../media/platform/qcom/camss/camss-vfe-480.c | 564 ++++++++++++++++++ drivers/media/platform/qcom/camss/camss-vfe.c | 17 +- drivers/media/platform/qcom/camss/camss-vfe.h | 4 + .../media/platform/qcom/camss/camss-video.c | 5 +- drivers/media/platform/qcom/camss/camss.c | 306 +++++++++- drivers/media/platform/qcom/camss/camss.h | 18 + 14 files changed, 1558 insertions(+), 104 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml rename drivers/media/platform/qcom/camss/{camss-csid-170.c => camss-csid-gen2.c} (95%) create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-480.c -- 2.33.0
