On Tue, Nov 16, 2021 at 02:03:02PM +0530, Vinod Koul wrote:
> On 15-11-21, 23:38, quic_vamslank@xxxxxxxxxxx wrote:
> > From: Vamsi Krishna Lanka <quic_vamslank@xxxxxxxxxxx>
> >
> > Add Global Clock Controller (GCC) support for SDX65 SoCs from Qualcomm.
> >
> > Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@xxxxxxxxxxx>
> > Reported-by: kernel test robot <lkp@xxxxxxxxx>
>
> Missing support reported ??
Not mising support but it reported to delete unused varaibles and after
the fix mentioned to add the reported tag.
>
> > +static struct clk_branch gcc_ahb_pcie_link_clk = {
> > + .halt_reg = 0x2e004,
> > + .halt_check = BRANCH_HALT,
> > + .clkr = {
> > + .enable_reg = 0x2e004,
> > + .enable_mask = BIT(0),
> > + .hw.init = &(struct clk_init_data){
> > + .name = "gcc_ahb_pcie_link_clk",
> > + .flags = CLK_IS_CRITICAL,
> > + .ops = &clk_branch2_ops,
> > + },
>
> If this clk is critical then why model in linux, enable directly in probe
> and leave it...?
Yes, actually i have the code which is enabling it directly inside the probe function.
so i will remove it here.
>
> > +static struct clk_branch gcc_pcie_0_clkref_en = {
> > + .halt_reg = 0x88004,
> > + .halt_check = BRANCH_HALT_DELAY,
>
> Why delay, add a comment at least for that
sure, will do
> > + .clkr = {
> > + .enable_reg = 0x88004,
> > + .enable_mask = BIT(0),
> > + .hw.init = &(struct clk_init_data){
> > + .name = "gcc_pcie_0_clkref_en",
> > + .ops = &clk_branch2_ops,
> > + },
> > + },
> > +};
> > +
> > +static struct clk_branch gcc_pcie_aux_clk = {
> > + .halt_reg = 0x43034,
> > + .halt_check = BRANCH_HALT_DELAY,
>
> Here too
will do.
>
> > +static struct clk_branch gcc_pcie_mstr_axi_clk = {
> > + .halt_reg = 0x43024,
> > + .halt_check = BRANCH_HALT_VOTED,
> > + .hwcg_reg = 0x43024,
> > + .hwcg_bit = 1,
> > + .clkr = {
> > + .enable_reg = 0x6d010,
> > + .enable_mask = BIT(1),
> > + .hw.init = &(struct clk_init_data){
> > + .name = "gcc_pcie_mstr_axi_clk",
> > + .ops = &clk_branch2_ops,
> > + },
> > + },
> > +};
> > +
> > +static struct clk_branch gcc_pcie_pipe_clk = {
> > + .halt_reg = 0x4303c,
> > + .halt_check = BRANCH_HALT_DELAY,
>
> here as well and few more places I guess
>
> > +static struct clk_branch gcc_xo_pcie_link_clk = {
> > + .halt_reg = 0x2e008,
> > + .halt_check = BRANCH_HALT,
> > + .hwcg_reg = 0x2e008,
> > + .hwcg_bit = 1,
> > + .clkr = {
> > + .enable_reg = 0x2e008,
> > + .enable_mask = BIT(0),
> > + .hw.init = &(struct clk_init_data){
> > + .name = "gcc_xo_pcie_link_clk",
> > + .flags = CLK_IS_CRITICAL,
>
> Here as well
Same as above.
> --
> ~Vinod
