On Thu, Oct 28, 2021 at 05:49:38PM +0100, Bryan O'Donoghue wrote: > Add a YAML binding for the power-delivery PHY silicon interface inside > Qualcomm's pm8150b hardware block. > > The pdphy driver operates with a type-c driver inside of a high level > single TCPM device to provide overall TCPM functionality. Same comments for this one... > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > --- > .../bindings/usb/qcom,pmic-pdphy.yaml | 115 ++++++++++++++++++ > 1 file changed, 115 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml > > diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml > new file mode 100644 > index 0000000000000..9110f6203b87f > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml > @@ -0,0 +1,115 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/usb/qcom,pmic-pdphy.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: Qualcomm PMIC based USB PDPHY driver > + > +maintainers: > + - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > + > +description: | > + Qualcomm PMIC Power Delivery PHY driver > + > +properties: > + compatible: > + enum: > + - qcom,pm8150b-pdphy > + > + reg: > + maxItems: 1 > + description: PDPHY base address > + > + interrupts: > + items: > + - description: Sig TX - transmitted reset signal > + - description: Sig RX - received reset signal > + - description: TX completion > + - description: RX completion > + - description: TX fail > + - description: TX discgard > + - description: RX discgard > + - description: Fast Role Swap event > + > + interrupt-names: > + items: > + - const: pmic-pdphy-sig-tx > + - const: pmic-pdphy-sig-rx > + - const: pmic-pdphy-msg-tx > + - const: pmic-pdphy-msg-rx > + - const: pmic-pdphy-msg-tx-failed > + - const: pmic-pdphy-msg-tx-discarded > + - const: pmic-pdphy-msg-rx-discarded > + - const: pmic-pdphy-fr-swap > + > + ports: > + description: Remote endpoint connections > + $ref: /connector/usb-connector.yaml#/properties/ports > + > + properties: > + port@0: > + description: Remote endpoints for the TCPM driver > + > + required: > + - port@0 > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/usb/typec/tcpm/qcom,pmic-usb-pdphy.h> > + > + pm8150b { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8150b_pdphy: pdphy@1700 { > + compatible = "qcom,pm8150b-pdphy"; > + reg = <0x1700>; > + interrupts = <0x2 0x17 PMIC_PDPHY_SIG_TX_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_SIG_RX_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_MSG_TX_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_MSG_RX_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_MSG_TX_FAIL_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_MSG_TX_DISCARD_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_MSG_RX_DISCARD_IRQ > + IRQ_TYPE_EDGE_RISING>, > + <0x2 0x17 PMIC_PDPHY_FR_SWAP_IRQ > + IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "pmic-pdphy-sig-tx", > + "pmic-pdphy-sig-rx", > + "pmic-pdphy-msg-tx", > + "pmic-pdphy-msg-rx", > + "pmic-pdphy-msg-tx-failed", > + "pmic-pdphy-msg-tx-discarded", > + "pmic-pdphy-msg-rx-discarded", > + "pmic-pdphy-fr-swap"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pmic_pdphy: endpoint { > + remote-endpoint = <&pmic_tcpm_pdphy>; > + }; > + }; > + }; > + }; > + }; > +... > -- > 2.33.0 > >
