Re: [RESEND PATCH v2 2/7] dt-bindings: usb: Add Qualcomm PMIC type C controller YAML schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 28, 2021 at 05:49:36PM +0100, Bryan O'Donoghue wrote:
> Add a YAML binding for the type-c silicon interface inside Qualcomm's
> pm8150b hardware block.
> 
> The type-c driver operates with a pdphy driver inside of a high level
> single TCPM device.
> 
> Based on original work by Wesley.
> 
> Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
>  .../bindings/usb/qcom,pmic-typec.yaml         | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> new file mode 100644
> index 0000000000000..72602daf910bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm PMIC based USB type C Detection Driver
> +
> +maintainers:
> +  - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> +
> +description: |
> +  Qualcomm PMIC Type C Detect
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pm8150b-usb-typec
> +
> +  reg:
> +    maxItems: 1
> +    description: Type C base address
> +
> +  interrupts:
> +    items:
> +      - description: Bitmask of CC attach, VBUS error, tCCDebounce done and more
> +      - description: VCONN Powered Detection
> +      - description: CC state change
> +      - description: VCONN over-current condition
> +      - description: VBUS state change
> +      - description: Attach Deteach notification
> +      - description: Legacy cable detect
> +      - description: Try.Src Try.Snk state change
> +
> +  interrupt-names:
> +    items:
> +      - const: pmic-typec-or-rid-detect-change
> +      - const: pmic-typec-vpd-detect
> +      - const: pmic-typec-cc-state-change
> +      - const: pmic-typec-vconn-oc
> +      - const: pmic-typec-vbus-change
> +      - const: pmic-typec-attach-detach
> +      - const: pmic-typec-legacy-cable-detect
> +      - const: pmic-typec-try-snk-src-detect

'pmic-typec-' is redundant, drop.

> +
> +  ports:
> +    description: Remote endpoint connections
> +    $ref: /connector/usb-connector.yaml#/properties/ports

No. Why don't you have a connector node that uses all of 
usb-connector.yaml? The schemas aren't designed to pick and chose 
properties out of them (usually).

> +
> +    properties:
> +      port@0:
> +        description: Remote endpoints for the TCPM driver

What kind of h/w is a 'TCPM driver'? port 0 already has a defined 
connection in usb-connector.yaml.

> +
> +    required:
> +      - port@0
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/usb/typec/tcpm/qcom,pmic-usb-typec.h>
> +    pm8150b {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pm8150b_typec: typec@1500 {
> +            compatible = "qcom,pm8150b-typec";
> +            reg = <0x1500>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            interrupts = <0x2 0x15 PMIC_TYPEC_OR_RID_IRQ
> +                          IRQ_TYPE_EDGE_RISING>,
> +                         <0x2 0x15 PMIC_TYPEC_VPD_IRQ
> +                          IRQ_TYPE_EDGE_BOTH>,
> +                         <0x2 0x15 PMIC_TYPEC_CC_STATE_IRQ
> +                          IRQ_TYPE_EDGE_RISING>,
> +                         <0x2 0x15 PMIC_TYPEC_VCONN_OC_IRQ
> +                          IRQ_TYPE_EDGE_BOTH>,
> +                         <0x2 0x15 PMIC_TYPEC_VBUS_IRQ
> +                          IRQ_TYPE_EDGE_RISING>,
> +                         <0x2 0x15 PMIC_TYPEC_ATTACH_DETACH_IRQ
> +                          IRQ_TYPE_EDGE_RISING>,
> +                         <0x2 0x15 PMIC_TYPEC_LEGACY_CABLE_IRQ
> +                          IRQ_TYPE_EDGE_BOTH>,
> +                         <0x2 0x15 PMIC_TYPEC_TRY_SNK_SRC_IRQ
> +                          IRQ_TYPE_EDGE_RISING>;
> +            interrupt-names = "pmic-typec-or-rid-detect-change",
> +                              "pmic-typec-vpd-detect",
> +                              "pmic-typec-cc-state-change",
> +                              "pmic-typec-vconn-oc",
> +                              "pmic-typec-vbus-change",
> +                              "pmic-typec-attach-detach",
> +                              "pmic-typec-legacy-cable-detect",
> +                              "pmic-typec-try-snk-src-detect";
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    pmic_typec: endpoint {
> +                        remote-endpoint = <&pmic_tcpm_typec>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.33.0
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux