On 2021-09-21 02:10, Rob Herring wrote:
On Fri, Sep 17, 2021 at 04:15:35PM +0530, Satya Priya wrote:
Add pm8008-regulator node and example.
Signed-off-by: Satya Priya <skakit@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/mfd/qcom,pm8008.yaml | 24
++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..de182f8 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -45,6 +45,10 @@ properties:
const: 0
patternProperties:
+ "^pm8008[a-z]?-regulator$":
Is more than 1 node possible for a given PMIC? If not use 'regulators'
for the node name.
Not possible, will change the node name.
+ type: object
+ $ref: "../regulator/qcom,pm8008-regulator.yaml#"
+
"^gpio@[0-9a-f]+$":
type: object
@@ -122,6 +126,26 @@ examples:
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pm8008-regulator {
+ compatible = "qcom,pm8008-regulator";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+ vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+ vdd_l5-supply = <&vreg_bob>;
+ vdd_l6-supply = <&vreg_bob>;
+ vdd_l7-supply = <&vreg_bob>;
+
+ pm8008_l1: regulator@4000 {
+ reg = <0x4000>;
+ regulator-name = "pm8008_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,min-dropout-voltage = <96000>;
+ };
+ };
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation
