On Fri, Sep 17, 2021 at 04:15:35PM +0530, Satya Priya wrote:
> Add pm8008-regulator node and example.
>
> Signed-off-by: Satya Priya <skakit@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/qcom,pm8008.yaml | 24 ++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> index ec3138c..de182f8 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> @@ -45,6 +45,10 @@ properties:
> const: 0
>
> patternProperties:
> + "^pm8008[a-z]?-regulator$":
Is more than 1 node possible for a given PMIC? If not use 'regulators'
for the node name.
> + type: object
> + $ref: "../regulator/qcom,pm8008-regulator.yaml#"
> +
> "^gpio@[0-9a-f]+$":
> type: object
>
> @@ -122,6 +126,26 @@ examples:
> interrupt-controller;
> #interrupt-cells = <2>;
> };
> +
> + pm8008-regulator {
> + compatible = "qcom,pm8008-regulator";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vdd_l1_l2-supply = <&vreg_s8b_1p2>;
> + vdd_l3_l4-supply = <&vreg_s1b_1p8>;
> + vdd_l5-supply = <&vreg_bob>;
> + vdd_l6-supply = <&vreg_bob>;
> + vdd_l7-supply = <&vreg_bob>;
> +
> + pm8008_l1: regulator@4000 {
> + reg = <0x4000>;
> + regulator-name = "pm8008_l1";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + qcom,min-dropout-voltage = <96000>;
> + };
> + };
> };
> };
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
>
