Re: [PATCH v4 1/2] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 17, 2021 at 5:36 AM Rakesh Pillai <pillair@xxxxxxxxxxxxxx> wrote:
>
> Add WPSS PIL loading support for SC7280 SoCs.
>
> Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
> ---
>  .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml  | 198 +++++++++++++++++++++
>  1 file changed, 198 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml

What happened to converting the existing binding? Given you already
did that, please don't drop it.

>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> new file mode 100644
> index 0000000..896d5f47
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> @@ -0,0 +1,198 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 WPSS Peripheral Image Loader
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> +description:
> +  This document defines the binding for a component that loads and boots firmware
> +  on the Qualcomm Technology Inc. WPSS.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc7280-wpss-pil
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      The base address and size of the qdsp6ss register
> +
> +  interrupts-extended:

Use 'interrupts'. The tooling supports either.

> +    minItems: 6

Don't need minItems unless it is less than 'items' length.

> +    items:
> +      - description: Watchdog interrupt
> +      - description: Fatal interrupt
> +      - description: Ready interrupt
> +      - description: Handover interrupt
> +      - description: Stop acknowledge interrupt
> +      - description: Shutdown acknowledge interrupt
> +
> +  interrupt-names:
> +    minItems: 6
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +      - const: shutdown-ack
> +
> +  clocks:
> +    minItems: 4
> +    items:
> +      - description: GCC WPSS AHB BDG Master clock
> +      - description: GCC WPSS AHB clock
> +      - description: GCC WPSS RSCP clock
> +      - description: XO clock
> +
> +  clock-names:
> +    minItems: 4
> +    items:
> +      - const: gcc_wpss_ahb_bdg_mst_clk
> +      - const: gcc_wpss_ahb_clk
> +      - const: gcc_wpss_rscp_clk

ahb_bdg, ahb, rscp is sufficient. Or use the same names as prior
versions (did the h/w clocks change?).

> +      - const: xo
> +
> +  power-domains:
> +    minItems: 2
> +    items:
> +      - description: CX power domain
> +      - description: MX power domain
> +
> +  power-domain-names:
> +    minItems: 2
> +    items:
> +      - const: cx
> +      - const: mx
> +
> +  resets:
> +    minItems: 2
> +    items:
> +      - description: AOSS restart
> +      - description: PDC SYNC
> +
> +  reset-names:
> +    minItems: 2
> +    items:
> +      - const: restart
> +      - const: pdc_sync
> +
> +  memory-region:
> +    maxItems: 1
> +    description: Reference to the reserved-memory for the Hexagon core
> +
> +  qcom,halt-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      three offsets within syscon for q6, modem and nc halt registers.
> +
> +  qcom,qmp:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Reference to the AOSS side-channel message RAM.
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: States used by the AP to signal the Hexagon core
> +    items:
> +      - description: Stop the modem
> +
> +  qcom,smem-state-names:
> +    $ref: /schemas/types.yaml#/definitions/string-array

string or string-array?

> +    description: The names of the state bits used for SMP2P output
> +    items:
> +      - const: stop

This says only 1 entry, so 'string'.

> +
> +  glink-edge:
> +    type: object
> +    description:
> +      Qualcomm G-Link subnode which represents communication edge, channels
> +      and devices related to the ADSP.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts-extended
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - power-domain-names
> +  - reset
> +  - reset-names
> +  - qcom,halt-regs
> +  - memory-region
> +  - qcom,qmp
> +  - qcom,smem-states
> +  - qcom,smem-state-names
> +  - glink-edge
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +    #include <dt-bindings/mailbox/qcom-ipcc.h>
> +    remoteproc@8a00000 {
> +        compatible = "qcom,sc7280-wpss-pil";
> +        reg = <0x08a00000 0x10000>;
> +
> +        interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
> +                              <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                              <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                              <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                              <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +                              <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +        interrupt-names = "wdog", "fatal", "ready", "handover",
> +                          "stop-ack", "shutdown-ack";
> +
> +        clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
> +                 <&gcc GCC_WPSS_AHB_CLK>,
> +                 <&gcc GCC_WPSS_RSCP_CLK>,
> +                 <&rpmhcc RPMH_CXO_CLK>;
> +        clock-names = "gcc_wpss_ahb_bdg_mst_clk",
> +                      "gcc_wpss_ahb_clk",
> +                      "gcc_wpss_rscp_clk",
> +                      "xo";
> +
> +        power-domains = <&rpmhpd SC7280_CX>,
> +                        <&rpmhpd SC7280_MX>;
> +        power-domain-names = "cx", "mx";
> +
> +        memory-region = <&wpss_mem>;
> +
> +        qcom,qmp = <&aoss_qmp>;
> +
> +        qcom,smem-states = <&wpss_smp2p_out 0>;
> +        qcom,smem-state-names = "stop";
> +
> +        resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
> +                 <&pdc_reset PDC_WPSS_SYNC_RESET>;
> +        reset-names = "restart", "pdc_sync";
> +
> +        qcom,halt-regs = <&tcsr_mutex 0x37000>;
> +
> +        status = "disabled";
> +
> +        glink-edge {
> +            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> +                                         IPCC_MPROC_SIGNAL_GLINK_QMP
> +                                         IRQ_TYPE_EDGE_RISING>;
> +            mboxes = <&ipcc IPCC_CLIENT_WPSS
> +                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> +            label = "wpss";
> +            qcom,remote-pid = <13>;
> +        };
> +    };
> --
> 2.7.4
>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux