Quoting Rakesh Pillai (2021-09-17 03:35:40) > Add WPSS PIL loading support for SC7280 SoCs. > > Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> > --- > .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 198 +++++++++++++++++++++ > 1 file changed, 198 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml > new file mode 100644 > index 0000000..896d5f47 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml > @@ -0,0 +1,198 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SC7280 WPSS Peripheral Image Loader Maybe spell out WPSS so we know what the acronym means? > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > + > +description: > + This document defines the binding for a component that loads and boots firmware > + on the Qualcomm Technology Inc. WPSS. > + > +properties: > + compatible: > + enum: > + - qcom,sc7280-wpss-pil > + > + reg: > + maxItems: 1 > + description: > + The base address and size of the qdsp6ss register > + > + interrupts-extended: > + minItems: 6 > + items: > + - description: Watchdog interrupt > + - description: Fatal interrupt > + - description: Ready interrupt > + - description: Handover interrupt > + - description: Stop acknowledge interrupt > + - description: Shutdown acknowledge interrupt > + > + interrupt-names: > + minItems: 6 > + items: > + - const: wdog > + - const: fatal > + - const: ready > + - const: handover > + - const: stop-ack > + - const: shutdown-ack > + > + clocks: > + minItems: 4 > + items: > + - description: GCC WPSS AHB BDG Master clock > + - description: GCC WPSS AHB clock > + - description: GCC WPSS RSCP clock > + - description: XO clock > + > + clock-names: > + minItems: 4 > + items: > + - const: gcc_wpss_ahb_bdg_mst_clk > + - const: gcc_wpss_ahb_clk > + - const: gcc_wpss_rscp_clk > + - const: xo > + > + power-domains: > + minItems: 2 > + items: > + - description: CX power domain > + - description: MX power domain > + > + power-domain-names: > + minItems: 2 > + items: > + - const: cx > + - const: mx > + > + resets: > + minItems: 2 > + items: > + - description: AOSS restart > + - description: PDC SYNC > + > + reset-names: > + minItems: 2 > + items: > + - const: restart > + - const: pdc_sync > + > + memory-region: > + maxItems: 1 > + description: Reference to the reserved-memory for the Hexagon core > + > + qcom,halt-regs: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: > + Phandle reference to a syscon representing TCSR followed by the > + three offsets within syscon for q6, modem and nc halt registers. > + > + qcom,qmp: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: Reference to the AOSS side-channel message RAM. > + > + qcom,smem-states: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: States used by the AP to signal the Hexagon core > + items: > + - description: Stop the modem > + > + qcom,smem-state-names: > + $ref: /schemas/types.yaml#/definitions/string-array > + description: The names of the state bits used for SMP2P output > + items: > + - const: stop > + > + glink-edge: > + type: object > + description: > + Qualcomm G-Link subnode which represents communication edge, channels > + and devices related to the ADSP. Are there any required properties of glink-edge? Or an empty node is all that's required? Maybe there's a binding that can be referenced here that describes the required properties? > + > +required: > + - compatible > + - reg > + - interrupts-extended > + - interrupt-names Why is interrupt-names required? > + - clocks > + - clock-names > + - power-domains > + - power-domain-names > + - reset > + - reset-names > + - qcom,halt-regs > + - memory-region > + - qcom,qmp > + - qcom,smem-states > + - qcom,smem-state-names > + - glink-edge > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,gcc-sc7280.h> > + #include <dt-bindings/clock/qcom,rpmh.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + #include <dt-bindings/reset/qcom,sdm845-aoss.h> > + #include <dt-bindings/reset/qcom,sdm845-pdc.h> > + #include <dt-bindings/mailbox/qcom-ipcc.h> > + remoteproc@8a00000 { > + compatible = "qcom,sc7280-wpss-pil"; > + reg = <0x08a00000 0x10000>; > + > + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, > + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", "handover", > + "stop-ack", "shutdown-ack"; > + > + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, > + <&gcc GCC_WPSS_AHB_CLK>, > + <&gcc GCC_WPSS_RSCP_CLK>, > + <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "gcc_wpss_ahb_bdg_mst_clk", > + "gcc_wpss_ahb_clk", > + "gcc_wpss_rscp_clk", > + "xo"; > + > + power-domains = <&rpmhpd SC7280_CX>, > + <&rpmhpd SC7280_MX>; > + power-domain-names = "cx", "mx"; > + > + memory-region = <&wpss_mem>; > + > + qcom,qmp = <&aoss_qmp>; > + > + qcom,smem-states = <&wpss_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, > + <&pdc_reset PDC_WPSS_SYNC_RESET>; > + reset-names = "restart", "pdc_sync"; > + > + qcom,halt-regs = <&tcsr_mutex 0x37000>; > + > + status = "disabled"; Can we remove status = "disabled" from the example? It provides no value. > + > + glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_WPSS > + IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + label = "wpss"; > + qcom,remote-pid = <13>; > + }; > + }; > -- > 2.7.4 >
