All of the machines of the Sony Yoshino platform are equipped with
two cameras, sharing the same regulators configuration.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 80c2cd7ae0eb..5fbe5abf4133 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -30,6 +30,38 @@ board_vbat: vbat-regulator {
regulator-boot-on;
};
+ cam0_vdig_vreg: cam0-vdig {
+ compatible = "regulator-fixed";
+ regulator-name = "cam0_vdig";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam0_vdig_default>;
+ };
+
+ cam1_vdig_vreg: cam1-vdig {
+ compatible = "regulator-fixed";
+ regulator-name = "cam1_vdig";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam1_vdig_default>;
+ vin-supply = <&vreg_s3a_1p35>;
+ };
+
+ cam_vio_vreg: cam-vio-vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vio_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_vio_default>;
+ vin-supply = <&vreg_lvs1a_1p8>;
+ };
+
touch_vddio_vreg: touch-vddio-vreg {
compatible = "regulator-fixed";
regulator-name = "touch_vddio_vreg";
@@ -284,6 +316,16 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
};
&pmi8998_gpio {
+ cam_vio_default: cam-vio-active {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-disable;
+ drive-push-pull;
+ output-low;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ power-source = <1>;
+ };
+
vib_default: vib-en {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -547,6 +589,20 @@ cci1_default: cci1-default {
drive-strength = <2>;
};
+ cam0_vdig_default: cam0-vdig-default {
+ pins = "gpio21";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cam1_vdig_default: cam1-vdig-default {
+ pins = "gpio25";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
hall_sensor0_default: acc-cover-open {
pins = "gpio124";
function = "gpio";
--
2.32.0
