Add configuration for the LAB and IBB regulators (in boost mode):
this platform has smartphones with three different display sizes,
hence different displays requiring different voltage.
The common configuration parameters have been put in the common
device-tree, while specific voltage specs and soft-start-us are
variant specific, so they have been put into the machine specific
dts file.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
.../msm8998-sony-xperia-yoshino-lilac.dts | 11 ++++++++
.../msm8998-sony-xperia-yoshino-maple.dts | 11 ++++++++
.../msm8998-sony-xperia-yoshino-poplar.dts | 11 ++++++++
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 25 +++++++++++++++++++
4 files changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
index 550de79e0151..0de919357de4 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
@@ -13,6 +13,17 @@ / {
compatible = "sony,xperia-lilac", "qcom,msm8998";
};
+&ibb {
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+};
+
+&lab {
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ qcom,soft-start-us = <800>;
+};
+
&vreg_l22a_2p85 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 35a6cdb55aec..87115d648cef 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -25,6 +25,17 @@ disp_dvdd_vreg: disp-dvdd-vreg {
};
};
+&ibb {
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+ regulator-min-microvolt = <5800000>;
+ regulator-max-microvolt = <5800000>;
+ qcom,soft-start-us = <200>;
+};
+
&pmi8998_gpio {
disp_dvdd_en: disp-dvdd-en-active {
pins = "gpio10";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
index 6255004b9a09..9fa3583c951b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
@@ -13,6 +13,17 @@ / {
compatible = "sony,xperia-poplar", "qcom,msm8998";
};
+&ibb {
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+ qcom,soft-start-us = <800>;
+};
+
&vreg_l18a_2p85 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 8c7aba8eadee..80c2cd7ae0eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -207,6 +207,31 @@ &blsp2_uart1 {
status = "okay";
};
+&ibb {
+ regulator-min-microamp = <800000>;
+ regulator-max-microamp = <800000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-over-current-protection;
+ regulator-pull-down;
+ regulator-ramp-delay = <1>;
+ regulator-settling-time-up-us = <600>;
+ regulator-settling-time-down-us = <1000>;
+ regulator-soft-start;
+ qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-over-current-protection;
+ regulator-pull-down;
+ regulator-ramp-delay = <1>;
+ regulator-settling-time-up-us = <50000>;
+ regulator-settling-time-down-us = <3000>;
+ regulator-soft-start;
+};
+
&mmcc {
status = "ok";
};
--
2.32.0
