On the Qualcomm sc8180x platform the bootloader does something related to PCI that leaves a pending "msi" interrupt, which with the current ordering often fires before init has a chance to enable the clocks that are necessary for the interrupt handler to access the hardware. Move the host_init() call before the registration of the "msi" interrupt handler to ensure the host driver has a chance to enable the clocks. The assignment of the bridge's ops and child_ops is moved along, because at least the TI Keystone driver overwrites these in its host_init callback. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- Changes since v1: - New patch, instead of enabling resources in the qcom driver before jumping to dw_pcie_host_init(), per Rob Herring's suggestion. .../pci/controller/dwc/pcie-designware-host.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index d1d9b8344ec9..f4755f3a03be 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -335,6 +335,16 @@ int dw_pcie_host_init(struct pcie_port *pp) if (pci->link_gen < 1) pci->link_gen = of_pci_get_max_link_speed(np); + /* Set default bus ops */ + bridge->ops = &dw_pcie_ops; + bridge->child_ops = &dw_child_pcie_ops; + + if (pp->ops->host_init) { + ret = pp->ops->host_init(pp); + if (ret) + return ret; + } + if (pci_msi_enabled()) { pp->has_msi_ctrl = !(pp->ops->msi_host_init || of_property_read_bool(np, "msi-parent") || @@ -388,15 +398,6 @@ int dw_pcie_host_init(struct pcie_port *pp) } } - /* Set default bus ops */ - bridge->ops = &dw_pcie_ops; - bridge->child_ops = &dw_child_pcie_ops; - - if (pp->ops->host_init) { - ret = pp->ops->host_init(pp); - if (ret) - goto err_free_msi; - } dw_pcie_iatu_detect(pci); dw_pcie_setup_rc(pp); -- 2.29.2