The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the power-domain
bindings and replace them with generic qmp_send interface instead.
Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt | 16 ++--------------
1 file changed, 2 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
index 783dc81b0f26..c0ae051a5b76 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -9,8 +9,7 @@ Messaging Protocol (QMP)
The AOSS side channel exposes control over a set of resources, used to control
a set of debug related clocks and to affect the low power state of resources
-related to the secondary subsystems. These resources are exposed as a set of
-power-domains.
+related to the secondary subsystems.
- compatible:
Usage: required
@@ -46,14 +45,6 @@ power-domains.
Definition: must be 0
The single clock represents the QDSS clock.
-- #power-domain-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 1
- The provided power-domains are:
- CDSP state (0), LPASS state (1), modem state (2), SLPI
- state (3), SPSS state (4) and Venus state (5).
-
= SUBNODES
The AOSS side channel also provides the controls for three cooling devices,
these are expressed as subnodes of the QMP node. The name of the node is used
@@ -66,8 +57,7 @@ to identify the resource and must therefor be "cx", "mx" or "ebi".
= EXAMPLE
-The following example represents the AOSS side-channel message RAM and the
-mechanism exposing the power-domains, as found in SDM845.
+The following example represents the AOSS side-channel message RAM as found in SDM845.
aoss_qmp: qmp@c300000 {
compatible = "qcom,sdm845-aoss-qmp";
@@ -75,8 +65,6 @@ mechanism exposing the power-domains, as found in SDM845.
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
- #power-domain-cells = <1>;
-
cx_cdev: cx {
#cooling-cells = <2>;
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
