Re: [RESEND PATCH v2 1/6] dt-bindings: input: add Qualcomm SPMI haptics driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 18, 2021 at 05:51:03PM +0000, Caleb Connolly wrote:
> Add bindings for qcom PMIC SPMI haptics driver.
> 
> Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> ---
>  .../bindings/input/qcom,spmi-haptics.yaml     | 128 ++++++++++++++++++
>  include/dt-bindings/input/qcom,spmi-haptics.h |  32 +++++
>  2 files changed, 160 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml
>  create mode 100644 include/dt-bindings/input/qcom,spmi-haptics.h
> 
> diff --git a/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml
> new file mode 100644
> index 000000000000..8ef9b4ec3a07
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2020 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/qcom,spmi-haptics.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc PMI8998 spmi haptics
> +
> +maintainers:
> +  - Caleb Connolly <caleb@xxxxxxxxxxxxx>
> +
> +description: |
> +  Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant
> +  actuators and eccentric rotating mass type haptics commonly found in mobile devices.
> +  It supports multiple sources of wave data such as an internal buffer, direct play
> +  (from kernel or userspace) as well as an audio output mode.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +        - qcom,pmi8998-haptics
> +        - qcom,pmi8996-haptics
> +        - qcom,pmi8941-haptics
> +      - const: qcom,spmi-haptics
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: short circuit interrupt
> +      - description: play interrupt
> +
> +  interrupt-names:
> +    items:
> +      - const: short
> +      - const: play
> +
> +  qcom,actuator-type:
> +    description: |
> +      The type of actuator attached to the hardware.
> +      Allowed values are,
> +        0 - HAP_TYPE_LRA
> +        1 - HAP_TYPE_ERM
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1 ]
> +    default: 0
> +
> +  qcom,wave-shape:
> +    description: |
> +      Selects the wave shape to use.
> +      Allowed values are,
> +        0 - HAP_WAVE_SINE
> +        1 - HAP_WAVE_SQUARE
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1 ]
> +    default: 0
> +
> +  qcom,play-mode:
> +    description: |
> +      Selects the play mode to use.
> +      Allowed values are,
> +        0 - HAP_PLAY_DIRECT
> +        1 - HAP_PLAY_BUFFER
> +        2 - HAP_PLAY_AUDIO
> +        3 - HAP_PLAY_PWM
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1, 2, 3 ]
> +    default: 2
> +
> +  qcom,wave-play-rate-us:
> +    description: |
> +      Wave sample durection in microseconds, 1/f where f
> +      is the resonant frequency of the actuator.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Don't need a type for standard units.

> +    minimum: 0
> +    maximum: 20475
> +
> +  qcom,brake-pattern:
> +    minItems: 4
> +    maxItems: 4
> +    description: |
> +      The brake pattern are the strengths of the pattern
> +      used to brake the haptics. Allowed values are,
> +        0 - 0V
> +        1 - Vmax/4
> +        2 - Vmax/2
> +        3 - Vmax
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    default: [0x3, 0x3, 0x2, 0x1]

To express the constraints on all items:

items:
  enum: [ 0, 1, 2, 3 ]

(items is a schema here rather than a list)

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - qcom,wave-play-rate-us
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/spmi/spmi.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/input/qcom,spmi-haptics.h>
> +
> +    pmi8998_lsid1: pmic@3 {

Drop unused labels.

> +      compatible = "qcom,pmi8998", "qcom,spmi-pmic";

Really, this needs to be converted to schema first so we're not adding 
warnings.

> +      reg = <0x3 SPMI_USID>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      pmi8998_haptics: haptics@c000 {
> +        compatible = "qcom,pmi8998-haptics", "qcom,spmi-haptics";
> +        reg = <0xc000>;
> +
> +        interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
> +                     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
> +        interrupt-names = "short", "play";
> +
> +        qcom,wave-shape = <HAP_WAVE_SINE>;
> +        qcom,play-mode = <HAP_PLAY_BUFFER>;
> +        qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
> +
> +        status = "disabled";

Don't show status in examples. 

> +      };
> +    };
> diff --git a/include/dt-bindings/input/qcom,spmi-haptics.h b/include/dt-bindings/input/qcom,spmi-haptics.h
> new file mode 100644
> index 000000000000..14a7e7d1471e
> --- /dev/null
> +++ b/include/dt-bindings/input/qcom,spmi-haptics.h
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */

Dual license please. DT files are used elsewhere.

> +/*
> + * This header provides constants for pmi8998 SPMI haptics options.
> + */
> +
> +#ifndef _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_
> +#define _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_
> +
> +// Actuator types
> +#define HAP_TYPE_LRA		0
> +#define HAP_TYPE_ERM		1
> +
> +// LRA Wave type
> +#define HAP_WAVE_SINE		0
> +#define HAP_WAVE_SQUARE		1
> +
> +// Play modes
> +#define HAP_PLAY_DIRECT		0
> +#define HAP_PLAY_BUFFER		1
> +#define HAP_PLAY_AUDIO		2
> +#define HAP_PLAY_PWM		3
> +
> +#define HAP_PLAY_MAX		HAP_PLAY_PWM
> +
> +// Auto resonance type
> +#define HAP_AUTO_RES_NONE	0
> +#define HAP_AUTO_RES_ZXD	1
> +#define HAP_AUTO_RES_QWD	2
> +#define HAP_AUTO_RES_MAX_QWD	3
> +#define HAP_AUTO_RES_ZXD_EOP	4
> +
> +#endif /* _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ */
> --
> 2.31.1
> 
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux