[PATCH V1] mmc: sdhci: Update the software timeout value for sdhc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Whenever SDHC run at clock rate 50MHZ or below, the hardware data
timeout value will be 21.47secs, which is approx. 22secs and we have
a current software timeout value as 10secs. We have to set software
timeout value more than the hardware data timeout value to avioid seeing
the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index bf238ad..1386f7d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1670,7 +1670,14 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	else if (!cmd->data && cmd->busy_timeout > 9000)
 		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
 	else
-		timeout += 10 * HZ;
+	       /*
+		* In some of the conditions hardware data timeout value could be
+		* approx 21.5 seconds and driver is setting software data timeout
+		* value less than the hardware data timeout value and software data
+		* timeout value should be more than the hardware data timeout value.
+		* So, set software data timeout value more than 21.5 sec i.e. 22sec.
+		*/
+		timeout += 22 * HZ;
 	sdhci_mod_timer(host, cmd->mrq, timeout);
 
 	if (host->use_external_dma)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux