Re: [PATCH V3 1/3] arm64: dts: sc7280: Add QSPI node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Roja Rani Yarubandi (2021-06-04 06:54:37)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index 3900cfc09562..d0edffc15736 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -268,6 +268,22 @@ pmr735b_die_temp {
>                 };
>  };
>  
> +&qspi {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
> +
> +       flash@0 {
> +               compatible = "jedec,spi-nor";
> +               reg = <0>;
> +
> +               /* TODO: Increase frequency after testing */

Is this going to change? Please set it to 37.5MHz if that's the max
supported.

> +               spi-max-frequency = <25000000>;
> +               spi-tx-bus-width = <2>;
> +               spi-rx-bus-width = <2>;
> +       };
> +};
> +
>  &qupv3_id_0 {
>         status = "okay";
>  };




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux