Re: [PATCH 1/3] dt-bindings: pci: qcom: Document PCIe bindings for SC720

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Prasad Malisetty (2021-06-04 04:26:57)
> On 2021-05-08 01:29, Stephen Boyd wrote:
> > Quoting Prasad Malisetty (2021-05-07 03:17:26)
> >> Document the PCIe DT bindings for SC7280 SoC.The PCIe IP is similar
> >> to the one used on SM8250. Add the compatible for SC7280.
> >>
> >> Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
> >> ---
> >>  Documentation/devicetree/bindings/pci/qcom,pcie.txt | 17
> >> +++++++++++++++++
> >>  1 file changed, 17 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> >> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> >> index 0da458a..e5245ed 100644
> >> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> >> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> >> @@ -12,6 +12,7 @@
> >>                         - "qcom,pcie-ipq4019" for ipq4019
> >>                         - "qcom,pcie-ipq8074" for ipq8074
> >>                         - "qcom,pcie-qcs404" for qcs404
> >> +                       - "qcom,pcie-sc7280" for sc7280
> >>                         - "qcom,pcie-sdm845" for sdm845
> >>                         - "qcom,pcie-sm8250" for sm8250
> >>
> >> @@ -133,6 +134,22 @@
> >>                         - "slave_bus"   AXI Slave clock
> >>
> >>  - clock-names:
> >> +       Usage: required for sc7280
> >> +       Value type: <stringlist>
> >> +       Definition: Should contain the following entries
> >> +                       - "aux"         Auxiliary clock
> >> +                       - "cfg"         Configuration clock
> >> +                       - "bus_master"  Master AXI clock
> >> +                       - "bus_slave"   Slave AXI clock
> >> +                       - "slave_q2a"   Slave Q2A clock
> >> +                       - "tbu"         PCIe TBU clock
> >> +                       - "ddrss_sf_tbu" PCIe SF TBU clock
> >> +                       - "pipe"        PIPE clock
> >> +                       - "pipe_src"    PIPE MUX
> >
> > Is pipe_src necessary? Is it the parent of the pipe clk? If so, please
> > remove it and do whatever is necessary on the pipe clk instead of the
> > parent of the clk.
>
> Here pipe_src is MUX. Newer targets require changing pipe-clk mux to
> switch between pipe_clk and XO for GDSC enable.
> After PHY init, need to configure MUX.

Ok. I see, so we have to change the parent of the parent of the pipe
clk?



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux