Bjorn,
On Wed, May 19, 2021 at 9:05 AM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, May 18, 2021 at 10:40 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
> >
> > This spi flash part is actually being clocked at 37.5MHz, not 25MHz,
> > because of the way the clk driver is rounding up the rate that is
> > requested to the nearest supported frequency. Let's update the frequency
> > here, and remove the TODO because this is the fastest frequency we're
> > going to be able to use here.
> >
> > Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 3 +--
> > 1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> > index 24d293ef56d7..af3c0e1e2223 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> > @@ -335,8 +335,7 @@ flash@0 {
> > compatible = "jedec,spi-nor";
> > reg = <0>;
> >
> > - /* TODO: Increase frequency after testing */
> > - spi-max-frequency = <25000000>;
> > + spi-max-frequency = <37500000>;
> > spi-tx-bus-width = <2>;
> > spi-rx-bus-width = <2>;
> > };
>
> Thanks. Looks right to me. I confirmed that the clock is 150 MHz in my
> "clk_summary" which is 4x 37.5.
>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
If you agree, I think this patch is ready to land.
-Doug
