On 3/18/21 8:52 PM, Ansuel Smith wrote:
Drop unused define for msm8960 replaced by generic api and reg_field.
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Thanks for the clean up!
Reviewed-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Warm Regards
Thara
---
drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
1 file changed, 1 insertion(+), 23 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 8c523b764862..31e44d17d484 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -10,8 +10,6 @@
#include <linux/thermal.h>
#include "tsens.h"
-#define CAL_MDEGC 30000
-
#define CONFIG_ADDR 0x3640
#define CONFIG_ADDR_8660 0x3620
/* CONFIG_ADDR bitmasks */
@@ -21,39 +19,19 @@
#define CONFIG_SHIFT_8660 28
#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
-#define STATUS_CNTL_ADDR_8064 0x3660
#define CNTL_ADDR 0x3620
/* CNTL_ADDR bitmasks */
#define EN BIT(0)
#define SW_RST BIT(1)
-#define SENSOR0_EN BIT(3)
+
#define MEASURE_PERIOD BIT(18)
#define SLP_CLK_ENA BIT(26)
#define SLP_CLK_ENA_8660 BIT(24)
#define SENSOR0_SHIFT 3
-/* INT_STATUS_ADDR bitmasks */
-#define MIN_STATUS_MASK BIT(0)
-#define LOWER_STATUS_CLR BIT(1)
-#define UPPER_STATUS_CLR BIT(2)
-#define MAX_STATUS_MASK BIT(3)
-
#define THRESHOLD_ADDR 0x3624
-/* THRESHOLD_ADDR bitmasks */
-#define THRESHOLD_MAX_LIMIT_SHIFT 24
-#define THRESHOLD_MIN_LIMIT_SHIFT 16
-#define THRESHOLD_UPPER_LIMIT_SHIFT 8
-#define THRESHOLD_LOWER_LIMIT_SHIFT 0
-
-/* Initial temperature threshold values */
-#define LOWER_LIMIT_TH 0x50
-#define UPPER_LIMIT_TH 0xdf
-#define MIN_LIMIT_TH 0x0
-#define MAX_LIMIT_TH 0xff
#define INT_STATUS_ADDR 0x363c
-#define TRDY_MASK BIT(7)
-#define TIMEOUT_US 100
#define S0_STATUS_OFF 0x3628
#define S1_STATUS_OFF 0x362c
--
Warm Regards
Thara