Drop unused define for msm8960 replaced by generic api and reg_field. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> --- drivers/thermal/qcom/tsens-8960.c | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-) diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 8c523b764862..31e44d17d484 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -10,8 +10,6 @@ #include <linux/thermal.h> #include "tsens.h" -#define CAL_MDEGC 30000 - #define CONFIG_ADDR 0x3640 #define CONFIG_ADDR_8660 0x3620 /* CONFIG_ADDR bitmasks */ @@ -21,39 +19,19 @@ #define CONFIG_SHIFT_8660 28 #define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) -#define STATUS_CNTL_ADDR_8064 0x3660 #define CNTL_ADDR 0x3620 /* CNTL_ADDR bitmasks */ #define EN BIT(0) #define SW_RST BIT(1) -#define SENSOR0_EN BIT(3) + #define MEASURE_PERIOD BIT(18) #define SLP_CLK_ENA BIT(26) #define SLP_CLK_ENA_8660 BIT(24) #define SENSOR0_SHIFT 3 -/* INT_STATUS_ADDR bitmasks */ -#define MIN_STATUS_MASK BIT(0) -#define LOWER_STATUS_CLR BIT(1) -#define UPPER_STATUS_CLR BIT(2) -#define MAX_STATUS_MASK BIT(3) - #define THRESHOLD_ADDR 0x3624 -/* THRESHOLD_ADDR bitmasks */ -#define THRESHOLD_MAX_LIMIT_SHIFT 24 -#define THRESHOLD_MIN_LIMIT_SHIFT 16 -#define THRESHOLD_UPPER_LIMIT_SHIFT 8 -#define THRESHOLD_LOWER_LIMIT_SHIFT 0 - -/* Initial temperature threshold values */ -#define LOWER_LIMIT_TH 0x50 -#define UPPER_LIMIT_TH 0xdf -#define MIN_LIMIT_TH 0x0 -#define MAX_LIMIT_TH 0xff #define INT_STATUS_ADDR 0x363c -#define TRDY_MASK BIT(7) -#define TIMEOUT_US 100 #define S0_STATUS_OFF 0x3628 #define S1_STATUS_OFF 0x362c -- 2.30.2
