On 3/17/2021 3:26 PM, Bhaumik Bhatt wrote:
On 2021-03-11 11:59 AM, Jeffrey Hugo wrote:Thanks for all the inputs. I think a good idea here would be to use fsleep()On 3/11/2021 1:00 AM, Loic Poulain wrote:Hi Bhaumik,On Thu, 11 Mar 2021 at 00:31, Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx> wrote:Introduce helper function to allow MHI core driver to poll for a value in a register field. This helps reach a common path to read and poll register values along with a retry time interval. Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx> --- drivers/bus/mhi/core/internal.h | 3 +++ drivers/bus/mhi/core/main.c | 23 +++++++++++++++++++++++ 2 files changed, 26 insertions(+)diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.hindex 6f80ec3..005286b 100644 --- a/drivers/bus/mhi/core/internal.h +++ b/drivers/bus/mhi/core/internal.h@@ -643,6 +643,9 @@ int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,void __iomem *base, u32 offset, u32 mask,u32 shift, u32 *out); +int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,+ void __iomem *base, u32 offset, u32 mask,+ u32 shift, u32 val, u32 delayus);void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,u32 offset, u32 val);void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base,diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c index 4e0131b..7c7f41a 100644 --- a/drivers/bus/mhi/core/main.c +++ b/drivers/bus/mhi/core/main.c @@ -4,6 +4,7 @@ * */ +#include <linux/delay.h> #include <linux/device.h> #include <linux/dma-direction.h> #include <linux/dma-mapping.h>@@ -37,6 +38,28 @@ int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,return 0; } +int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl, + void __iomem *base, u32 offset,+ u32 mask, u32 shift, u32 val, u32 delayus)+{ + int ret; + u32 out, retry = (mhi_cntrl->timeout_ms * 1000) / delayus; + + while (retry--) {+ ret = mhi_read_reg_field(mhi_cntrl, base, offset, mask, shift,+ &out); + if (ret) + return ret; + + if (out == val) + return 0; + + udelay(delayus);Have you read my previous comment? Do you really want to risk hogging the CPU for several seconds? we know that some devices take several seconds to start/boot. Why not using msleep variant here?usleep_range() if there is a desire to stay in us units? Given that the use of this function is for 25ms in one case, I wonder if this warning is applicable: https://elixir.bootlin.com/linux/latest/source/include/linux/delay.h#L28 Counter point, 1ms latency over PCIe is not unusual. I know we've removed the PCIe dependencies from MHI, but PCIe is the real usecase at this time. Seems like this function could behave a bit weird if the parameter to udelay is something like "100", but the mhi_read_reg_field() call takes significantly longer than that. Feels like in some scenarios, we could actually exceed the timeout by a non-trivial margin. I guess I'm going back and forth in determining if us scale timing is a benefit in any way.API as we need to allow any timeout the caller specifies. Also, plan is to drop the patch #3 in this series since that will require a busywait due to the code being in panic path. I don't wish to accommodate another variable here for busywait but that would be an option to pick sleep or delay depending on the caller's path. Please respond if there are any concerns.
fsleep() would be some improvement, but I think there is still the issue Loic points out where if delayus is small, but timeout_ms is large (say 50us and 25s), this function will end up burning a lot of cpu cycles. However that is likely an edge case, and if your poll cycle is that small, I think it should be assumed that the event is expected to happen quickly, so the full timeout should not be hit.
fsleep() does nothing to address this function possibly taking quite a bit longer than the timeout in overall wall time. Perhaps that is not a significant concern though.
-- Jeffrey Hugo Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
