As per Dmitry Baryshkov [1]: a) The 2nd "reg" should be 0x3c because "Offset 0x38 is USB3_DP_COM_REVISION_ID3 (not used by the current driver though)." b) The 3rd "reg" "is a serdes region and qmp_v3_dp_serdes_tbl contains registers 0x148 and 0x154." I think because the 3rd "reg" is a serdes region we should just use the same size as the 1st "reg"? [1] https://lore.kernel.org/r/ee5695bb-a603-0dd5-7a7f-695e919b1af1@xxxxxxxxxx Cc: Stephen Boyd <swboyd@xxxxxxxxxxxx> Cc: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx> Cc: Chandan Uddaraju <chandanu@xxxxxxxxxxxxxx> Cc: Vara Reddy <varar@xxxxxxxxxxxxxx> Cc: Tanmay Shah <tanmay@xxxxxxxxxxxxxx> Cc: Rob Clark <robdclark@xxxxxxxxxxxx> Fixes: 58fd7ae621e7 ("arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 83fbb481cae5..61732e5efe62 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2754,8 +2754,8 @@ usb_1_hsphy: phy@88e3000 { usb_1_qmpphy: phy-wrapper@88e9000 { compatible = "qcom,sc7180-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; + <0 0x088e8000 0 0x3c>, + <0 0x088ea000 0 0x18c>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; -- 2.31.0.rc2.261.g7f71774620-goog
