Re: [PATCH v3 3/4] arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On Tue, Feb 9, 2021 at 12:29 PM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> GENI SPI controller shows several issues if it manages the CS on its own
> (see 37dd4b777942 ("arm64: dts: qcom: sc7180: Provide pinconf for SPI to
> use GPIO for CS")) for the details. Provide pinctrl entries for SPI
> controllers using the same CS pin but in GPIO mode.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 100 +++++++++++++++++++++++++++
>  1 file changed, 100 insertions(+)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux