GENI SPI controller shows several issues if it manages the CS on its own
(see 37dd4b777942 ("arm64: dts: qcom: sc7180: Provide pinconf for SPI to
use GPIO for CS") for the details). Configure SPI0 CS pin as a GPIO.
Changes since v2:
- Move pinctrl-names to the board file.
- Reorder CS/CS-gpio/data-clk nodes to follow alphabetical sort.
Changes since v1:
- Split sm8250's spi pin config into mux/config parts, split away CS
handling from main SPI pinctrl nodes.
----------------------------------------------------------------
Dmitry Baryshkov (4):
arm64: dts: qcom: sm8250: split spi pinctrl config
arm64: dts: qcom: sm8250: further split of spi pinctrl config
arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 13 +
arch/arm64/boot/dts/qcom/sm8250.dtsi | 521 +++++++++++++++----------------
2 files changed, 273 insertions(+), 261 deletions(-)
