Add dmas property for spi@880000 and pinconf setting so that we can use
dma for this spi device. Also, add iommu properties for qup and spi.
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7cc236575ee2..0653468f26ce 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -418,6 +418,10 @@ &gcc {
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&gpi_dma0 {
+ status = "okay";
+};
+
&gpu {
zap-shader {
memory-region = <&gpu_mem>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c9a127bbd606..bd9952f54721 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1183,6 +1184,9 @@ spi0: spi@880000 {
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -2622,6 +2626,13 @@ pinmux {
"gpio2", "gpio3";
function = "qup0";
};
+
+ config {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ drive-strength = <6>;
+ bias-disable;
+ };
};
qup_spi1_default: qup-spi1-default {
--
2.26.2
