Re: [PATCH v2 12/18] ARM: dts: qcom: sdx55-mtp: Enable QPIC NAND

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05-01-21, 17:56, Manivannan Sadhasivam wrote:
> Enable QPIC NAND on SDX55-MTP board.

Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>

> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-sdx55-mtp.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
> index 74ea6f425c77..b8d432a4324c 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
> @@ -29,3 +29,15 @@ &blsp1_uart3 {
>  &qpic_bam {
>  	status = "ok";
>  };
> +
> +&qpic_nand {
> +	status = "ok";
> +
> +	nand@0 {
> +		reg = <0>;
> +
> +		nand-ecc-strength = <8>;
> +		nand-ecc-step-size = <512>;
> +		nand-bus-width = <8>;
> +	};
> +};
> -- 
> 2.25.1

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux