Add qpic_nand node to support QPIC NAND controller on SDX55 platform.
Since there is no "aon" clock in SDX55, a dummy clock is provided.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1b9b990ad0a2..1a6947753972 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -41,6 +41,12 @@ pll_test_clk: pll-test-clk {
#clock-cells = <0>;
clock-frequency = <400000000>;
};
+
+ nand_clk_dummy: nand-clk-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
};
cpus {
@@ -178,6 +184,22 @@ qpic_bam: dma@1b04000 {
status = "disabled";
};
+ qpic_nand: nand@1b30000 {
+ compatible = "qcom,sdx55-nand";
+ reg = <0x01b30000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>,
+ <&nand_clk_dummy>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+ };
+
tcsr_mutex_block: syscon@1f40000 {
compatible = "syscon";
reg = <0x1f40000 0x20000>;
--
2.25.1
