Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
On Thu, 10 Dec 2020 10:22:38 -0800 you wrote:
> I would repeat the same commit message that was in commit 5e4b7e82d497
> ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems
> silly to do so when you could just go read that commit.
>
> NOTE: this is actually extra terrible because we're missing the 50 MHz
> rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add
> 50 MHz clock rate for SDC2")). That means then when you run an older
> SD card it'll try to clock it at 100 MHz when it's only specced to run
> at 50 MHz max. As you can probably guess that doesn't work super
> well.
>
> [...]
Here is the summary with links:
- [1/2] clk: qcom: gcc-sc7180: Use floor ops for sdcc clks
https://git.kernel.org/qcom/c/6d37a8d19283
- [2/2] clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2
https://git.kernel.org/qcom/c/043577518f02
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
