Re: [PATCH 0/5] drm/msm/dpu: implement merge3D support for new platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

On Thu, 22 Oct 2020 16:16:53 +0300 you wrote:
> Compared to SDM8450 DPU devices with active CTL support (SC7180, SM8x50)
> have merge support implemented in a separate hardware block, which is
> not supported at this point. Add support for dualpipe configuration on
> these platforms. Tested on Qualcomm RB5 (SM8250) platform.

Here is the summary with links:
  - [1/5] drm/msm/dpu: simplify interface flush handling
    https://git.kernel.org/qcom/c/d8199c85f3e4
  - [2/5] drm/msm/dpu: initial support for merge3D hardware block
    https://git.kernel.org/qcom/c/4369c93cf36b
  - [3/5] drm/msm/dpu: handle merge_3d configuration in hw_ctl block
    https://git.kernel.org/qcom/c/c40e6c6733a0
  - [4/5] drm/msm/dpu: setup merge modes in merge_3d block
    https://git.kernel.org/qcom/c/9ffd0e856993
  - [5/5] drm/msm/dpu: enable merge_3d support on sm8150/sm8250
    https://git.kernel.org/qcom/c/3e79527a33a8

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux