[PATCH 0/5] drm/msm/dpu: implement merge3D support for new platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: Rob Clark <robdclark@xxxxxxxxx>, Sean Paul <sean@xxxxxxxxxx>, Jonathan Marek <jonathan@xxxxxxxx>, linux-arm-msm@xxxxxxxxxxxxxxx, dri-devel@xxxxxxxxxxxxxxxxxxxxx, freedreno@xxxxxxxxxxxxxxxxxxxxx
Subject: [PATCH 0/5] drm/msm/dpu: implement merge3D support for new platforms
From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Date: Thu, 22 Oct 2020 16:16:53 +0300
Cc: David Airlie <airlied@xxxxxxxx>, Daniel Vetter <daniel@xxxxxxxx>

Compared to SDM8450 DPU devices with active CTL support (SC7180, SM8x50)
have merge support implemented in a separate hardware block, which is
not supported at this point. Add support for dualpipe configuration on
these platforms. Tested on Qualcomm RB5 (SM8250) platform.

Follow-Ups:
- Re: [PATCH 0/5] drm/msm/dpu: implement merge3D support for new platforms
  - From: patchwork-bot+linux-arm-msm
- [PATCH 5/5] drm/msm/dpu: enable merge_3d support on sm8150/sm8250
  - From: Dmitry Baryshkov
- [PATCH 4/5] drm/msm/dpu: setup merge modes in merge_3d block
  - From: Dmitry Baryshkov
- [PATCH 3/5] drm/msm/dpu: handle merge_3d configuration in hw_ctl block
  - From: Dmitry Baryshkov
- [PATCH 2/5] drm/msm/dpu: initial support for merge3D hardware block
  - From: Dmitry Baryshkov
- [PATCH 1/5] drm/msm/dpu: simplify interface flush handling
  - From: Dmitry Baryshkov

Prev by Date: Re: [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support
Next by Date: [PATCH 1/5] drm/msm/dpu: simplify interface flush handling
Previous by thread: [PATCHv2 0/4] coresight: etf/etb10/etr: Fix NULL pointer dereference crashes
Next by thread: [PATCH 1/5] drm/msm/dpu: simplify interface flush handling
Index(es):
- Date
- Thread

[Index of Archives] [Linux ARM Kernel] [Linux ARM] [Linux Omap] [Fedora ARM] [Linux for Sparc] [IETF Annouce] [Security] [Bugtraq] [Linux MIPS] [ECOS] [Asterisk Internet PBX] [Linux API]