Re: [PATCH v2 1/2] arm64: dts: qcom: sc7180: Add sc7180-lazor-r2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Nov 5, 2020 at 4:37 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
>
> One important delta with respect to rev1 is a switch of the power
> supply for the onboard USB hub from 'pp3300_l7c' to 'pp3300_a' + a
> load switch. The actual regulator switch is done by the patch 'arm64:
> dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for
> pp3300_hub', since it affects the entire trogdor platform. Here we
> only add the .dts files for lazor rev2 and replace the generic
> compatible entries in the rev1 .dts files.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
>
> Changes in v2:
> - patch added to the series
>
>  arch/arm64/boot/dts/qcom/Makefile              |  3 +++
>  .../dts/qcom/sc7180-trogdor-lazor-r1-kb.dts    |  4 ++--
>  .../dts/qcom/sc7180-trogdor-lazor-r1-lte.dts   |  4 ++--
>  .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts  |  4 ++--
>  .../dts/qcom/sc7180-trogdor-lazor-r2-kb.dts    | 17 +++++++++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r2-lte.dts   | 18 ++++++++++++++++++
>  .../boot/dts/qcom/sc7180-trogdor-lazor-r2.dts  | 15 +++++++++++++++
>  7 files changed, 59 insertions(+), 6 deletions(-)

So it's pretty unlikely that this change actually happened in "-rev2".
"-rev2" was a _very_ small batch of boards that I don't think made it
into too many people's hands.  You probably want "-rev3".


> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r2-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r2-kb.dts
> new file mode 100644
> index 000000000000..7c3a702ef209
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r2-kb.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Lazor board device tree source
> + *
> + * Copyright 2020 Google LLC.
> + */
> +
> +#include "sc7180-trogdor-lazor-r1.dts"

Should have been updated to not point to '-r1', no?

===

If you want to compare, you can also look at my (abandoned) CL:
https://crrev.com/c/2481550

...that forked out a "-rev3" to tag the WiFi slightly differently, but
we ended up abandoning it because we found a better way to handle the
WiFi stuff.

-Doug



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux