[PATCH 1/7] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add programming sequence support for managing the Stromer
PLLs.

Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
---
 drivers/clk/qcom/clk-alpha-pll.c | 156 ++++++++++++++++++++++++++++++++++++++-
 drivers/clk/qcom/clk-alpha-pll.h |   5 ++
 2 files changed, 160 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 26139ef..ce3257f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -116,6 +116,19 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_OPMODE] = 0x38,
 		[PLL_OFF_ALPHA_VAL] = 0x40,
 	},
+
+	[CLK_ALPHA_PLL_TYPE_STROMER] = {
+		[PLL_OFF_L_VAL] = 0x08,
+		[PLL_OFF_ALPHA_VAL] = 0x10,
+		[PLL_OFF_ALPHA_VAL_U] = 0x14,
+		[PLL_OFF_USER_CTL] = 0x18,
+		[PLL_OFF_USER_CTL_U] = 0x1c,
+		[PLL_OFF_CONFIG_CTL] = 0x20,
+		[PLL_OFF_CONFIG_CTL_U] = 0xff,
+		[PLL_OFF_TEST_CTL] = 0x30,
+		[PLL_OFF_TEST_CTL_U] = 0x34,
+		[PLL_OFF_STATUS] = 0x28,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
@@ -127,6 +140,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define ALPHA_BITWIDTH		32U
 #define ALPHA_SHIFT(w)		min(w, ALPHA_BITWIDTH)
 
+#define	PLL_STATUS_REG_SHIFT	8
+
 #define PLL_HUAYRA_M_WIDTH		8
 #define PLL_HUAYRA_M_SHIFT		8
 #define PLL_HUAYRA_M_MASK		0xff
@@ -210,7 +225,7 @@ static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config)
 {
-	u32 val, mask;
+	u32 val, val_u, mask, mask_u;
 
 	regmap_write(regmap, PLL_L_VAL(pll), config->l);
 	regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
@@ -240,14 +255,143 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 	mask |= config->pre_div_mask;
 	mask |= config->post_div_mask;
 	mask |= config->vco_mask;
+	mask |= config->alpha_en_mask;
+	mask |= config->alpha_mode_mask;
 
 	regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
 
+	/* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */
+	val_u = config->status_reg_val << PLL_STATUS_REG_SHIFT;
+	val_u |= config->lock_det;
+
+	mask_u = config->status_reg_mask;
+	mask_u |= config->lock_det;
+
+	if (val_u != 0)
+		regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u);
+
+	if (config->test_ctl_val != 0)
+		regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
+
+	if (config->test_ctl_hi_val != 0)
+		regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
+
 	if (pll->flags & SUPPORTS_FSM_MODE)
 		qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
 }
 EXPORT_SYMBOL_GPL(clk_alpha_pll_configure);
 
+static unsigned long
+alpha_pll_stromer_calc_rate(u64 prate, u32 l, u64 a)
+{
+	return (prate * l) + ((prate * a) >> ALPHA_REG_BITWIDTH);
+}
+
+static unsigned long
+alpha_pll_stromer_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a)
+{
+	u64 remainder;
+	u64 quotient;
+
+	quotient = rate;
+	remainder = do_div(quotient, prate);
+	*l = quotient;
+
+	if (!remainder) {
+		*a = 0;
+		return rate;
+	}
+
+	quotient = remainder << ALPHA_REG_BITWIDTH;
+
+	remainder = do_div(quotient, prate);
+
+	if (remainder)
+		quotient++;
+
+	*a = quotient;
+	return alpha_pll_stromer_calc_rate(prate, *l, *a);
+}
+
+static unsigned long
+clk_alpha_pll_stromer_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	u32 l, low, high, ctl;
+	u64 a = 0, prate = parent_rate;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+
+	regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
+
+	regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &ctl);
+	if (ctl & PLL_ALPHA_EN) {
+		regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &low);
+		regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
+			    &high);
+		a = (u64)high << ALPHA_BITWIDTH | low;
+	}
+
+	return alpha_pll_stromer_calc_rate(prate, l, a);
+}
+
+static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw,
+					 struct clk_rate_request *req)
+{
+	unsigned long rate = req->rate;
+	u32 l;
+	u64 a;
+
+	rate = alpha_pll_stromer_round_rate(rate, req->best_parent_rate, &l, &a);
+
+	return 0;
+}
+
+static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 l;
+	int ret;
+	u64 a;
+
+	rate = alpha_pll_stromer_round_rate(rate, prate, &l, &a);
+
+	/* Write desired values to registers */
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
+					a >> ALPHA_BITWIDTH);
+
+	regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+			   PLL_ALPHA_EN, PLL_ALPHA_EN);
+
+	if (!clk_hw_is_enabled(hw))
+		return 0;
+
+	/* Stromer PLL supports Dynamic programming.
+	 * It allows the PLL frequency to be changed on-the-fly without first
+	 * execution of a shutdown procedure followed by a bring up procedure.
+	 */
+
+	regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
+			   PLL_UPDATE);
+	/* Make sure PLL_UPDATE request goes through */
+	mb();
+
+	/* Wait for PLL_UPDATE to be cleared */
+	ret = wait_for_pll_update(pll);
+	if (ret)
+		return ret;
+
+	/* Wait 11or more PLL clk_ref ticks[to be explored more on wait] */
+
+	/* Poll LOCK_DET for one */
+	ret = wait_for_pll_enable_lock(pll);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
 {
 	int ret;
@@ -898,6 +1042,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
 
+const struct clk_ops clk_alpha_pll_stromer_ops = {
+	.enable = clk_alpha_pll_enable,
+	.disable = clk_alpha_pll_disable,
+	.is_enabled = clk_alpha_pll_is_enabled,
+	.recalc_rate = clk_alpha_pll_stromer_recalc_rate,
+	.determine_rate = clk_alpha_pll_stromer_determine_rate,
+	.set_rate = clk_alpha_pll_stromer_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
+
 const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
 	.enable = clk_trion_pll_enable,
 	.disable = clk_trion_pll_disable,
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d3201b8..3e25b1b 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -15,6 +15,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
 	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
+	CLK_ALPHA_PLL_TYPE_STROMER,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
@@ -121,6 +122,9 @@ struct alpha_pll_config {
 	u32 post_div_mask;
 	u32 vco_val;
 	u32 vco_mask;
+	u32 status_reg_val;
+	u32 status_reg_mask;
+	u32 lock_det;
 };
 
 extern const struct clk_ops clk_alpha_pll_ops;
@@ -129,6 +133,7 @@ extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_ops;
 extern const struct clk_ops clk_alpha_pll_huayra_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
+extern const struct clk_ops clk_alpha_pll_stromer_ops;
 
 extern const struct clk_ops clk_alpha_pll_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux