On 9/22/20 3:04 PM, Stephen Boyd wrote:
Quoting Jonathan Marek (2020-09-11 08:34:06)
Add support for the display clock controller found on SM8150
based devices. This would allow display drivers to probe and
control their clocks.
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/dispcc-sm8150.c | 1152 ++++++++++++++++++++++++++++++
3 files changed, 1162 insertions(+)
create mode 100644 drivers/clk/qcom/dispcc-sm8150.c
If the bindings are the same for these two drivers I wonder if there is
anything different between the two. Maybe the two drivers can be one
driver?
Possibly, the biggest difference seems to be the plls (trion vs lucid,
different config), which could be resolved in the probe() function. If
you think combining the drivers is the right thing to do then I can do that.
