Re: [PATCH RFC 1/8] dt-bindings: thermal: Introduce monitor-falling parameter to thermal trip point binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 16, 2020 at 11:22:19PM -0400, Thara Gopinath wrote:
> Introduce a new binding parameter to thermal trip point description
> to indicate whether the temperature level specified by the trip point
> is monitored for a rise or fall in temperature.
> 
> Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/thermal/thermal-zones.yaml         | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> index 3ec9cc87ec50..cc1332ad6c16 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> @@ -161,6 +161,13 @@ patternProperties:
>                    The active trip type can be used to control other HW to
>                    help in cooling e.g. fans can be sped up or slowed down
>  
> +              monitor-falling:
> +                description: |
> +                  boolean, If true, the trip point is being monitored for
> +                  falling temperature. If false/absent/default, the trip
> +                  point is being monitored for rising temperature.
> +                type: boolean

What if you wanted to monitor for both?

> +
>              required:
>                - temperature
>                - hysteresis
> -- 
> 2.25.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux