On Mon 14 Sep 13:58 UTC 2020, satya priya wrote: > Changes in V2: > - As per Matthias's comment added wakeup support for all the UARTs > of SC7180. > - Added sleep state in sc7180-idp.dts file. > - Modify the if check in set_mctrl API in serial driver to avoid > making RFR high during suspend. > > Changes in V3: > - As per Matthias's comments modify the idp dts pin config to keep > only the required pin settings. > - Remove the extra parentheses from serial driver patch. > > Changes in V4: > - As per Matthias's comments, change the commit text to mention why > GPIO function needs to be selected in sleep. > - Add separate patch for improvements made in pin conf settings. > > Changes in V5: > - Moved pinctrl and interrupt configuration to board specific files. > - Added new patch for trogdor board specific changes. > > Changes in V6: > - As per Doug's comments, fixed nits in patch 2 and 3. > - As per Bjorn's comments changed the commit text and rationale for > rts, tx and rx in patch 2 and 3. > > satya priya (4): > arm64: dts: qcom: sc7180: Improve the uart3 pin config for sc7180-idp > arm64: dts: qcom: sc7180: Add wakeup support for BT UART on sc7180-idp > arm64: dts: qcom: sc7180-trogdor: Add wakeup support for BT UART Applied these... > tty: serial: qcom_geni_serial: Fix the UART wakeup issue ...expecting Greg to pick this one up. Thanks, Bjorn > > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 65 +++++++++++++++++++++++++--- > arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 54 +++++++++++++++++++++++ > drivers/tty/serial/qcom_geni_serial.c | 2 +- > 3 files changed, 114 insertions(+), 7 deletions(-) > > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
