Changes in V2: - As per Matthias's comment added wakeup support for all the UARTs of SC7180. - Added sleep state in sc7180-idp.dts file. - Modify the if check in set_mctrl API in serial driver to avoid making RFR high during suspend. Changes in V3: - As per Matthias's comments modify the idp dts pin config to keep only the required pin settings. - Remove the extra parentheses from serial driver patch. Changes in V4: - As per Matthias's comments, change the commit text to mention why GPIO function needs to be selected in sleep. - Add separate patch for improvements made in pin conf settings. Changes in V5: - Moved pinctrl and interrupt configuration to board specific files. - Added new patch for trogdor board specific changes. Changes in V6: - As per Doug's comments, fixed nits in patch 2 and 3. - As per Bjorn's comments changed the commit text and rationale for rts, tx and rx in patch 2 and 3. satya priya (4): arm64: dts: qcom: sc7180: Improve the uart3 pin config for sc7180-idp arm64: dts: qcom: sc7180: Add wakeup support for BT UART on sc7180-idp arm64: dts: qcom: sc7180-trogdor: Add wakeup support for BT UART tty: serial: qcom_geni_serial: Fix the UART wakeup issue arch/arm64/boot/dts/qcom/sc7180-idp.dts | 65 +++++++++++++++++++++++++--- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 54 +++++++++++++++++++++++ drivers/tty/serial/qcom_geni_serial.c | 2 +- 3 files changed, 114 insertions(+), 7 deletions(-) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
