On Thu, Sep 10, 2020 at 04:59:59PM +0300, Dmitry Baryshkov wrote:
> Define adc-tm5 thermal monitoring part. Individual channes and thermal
> zones are to be configured in per-device dts files.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Thanks,
Mani
> ---
> arch/arm64/boot/dts/qcom/pm8150.dtsi | 10 ++++++++++
> arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++
> arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
> 3 files changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> index 1b6406927509..b1b518c6a2c9 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> @@ -97,6 +97,16 @@ die-temp@6 {
> };
> };
>
> + pm8150_adc_tm: adc-tm@3500 {
> + compatible = "qcom,spmi-adc-tm5";
> + reg = <0x3500>;
> + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> rtc@6000 {
> compatible = "qcom,pm8941-rtc";
> reg = <0x6000>;
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> index e112e8876db6..8e2f3250c914 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -95,6 +95,16 @@ chg-temp@9 {
> };
> };
>
> + pm8150b_adc_tm: adc-tm@3500 {
> + compatible = "qcom,spmi-adc-tm5";
> + reg = <0x3500>;
> + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> pm8150b_gpios: gpio@c000 {
> compatible = "qcom,pm8150b-gpio";
> reg = <0xc000>;
> diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> index 62139538b7d9..9f214ceec2b7 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> @@ -89,6 +89,16 @@ die-temp@6 {
> };
> };
>
> + pm8150l_adc_tm: adc-tm@3500 {
> + compatible = "qcom,spmi-adc-tm5";
> + reg = <0x3500>;
> + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> pm8150l_gpios: gpio@c000 {
> compatible = "qcom,pm8150l-gpio";
> reg = <0xc000>;
> --
> 2.28.0
>
