Add device tree nodes describing used i2c busses according to the dts
found in msm-4.19 tree.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 28 +++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 6e2f7ae1d621..fd194ed7fbc8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -358,10 +358,38 @@ &cdsp {
firmware-name = "qcom/sm8250/cdsp.mbn";
};
+&i2c1 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* NQ NFC chip @28 */
+};
+
+&i2c13 {
+ status = "okay";
+
+ /* st,stmfts @ 49 */
+};
+
+&i2c15 {
+ status = "okay";
+
+ /* smb1390 @ 10 */
+ /* rtc6226 @ 64 */
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
&qupv3_id_1 {
status = "okay";
};
+&qupv3_id_2 {
+ status = "okay";
+};
+
&slpi {
status = "okay";
firmware-name = "qcom/sm8250/slpi.mbn";
--
2.28.0
