Re: [PATCH 6/7] cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 8, 2020 at 1:27 PM Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
>
> SM8250 SoC uses EPSS block for carrying out the cpufreq duties. Hence, add
> support for it in the driver with relevant of_match data.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Reviewed-by: Amit Kucheria <amitk@xxxxxxxxxx>


> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index de816bcafd33..c3c397cc3dc6 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -285,8 +285,17 @@ static const struct qcom_cpufreq_soc_data qcom_soc_data = {
>         .lut_row_size = 32,
>  };
>
> +static const struct qcom_cpufreq_soc_data sm8250_soc_data = {
> +       .reg_enable = 0x0,
> +       .reg_freq_lut = 0x100,
> +       .reg_volt_lut = 0x200,
> +       .reg_perf_state = 0x320,
> +       .lut_row_size = 4,
> +};
> +
>  static const struct of_device_id qcom_cpufreq_hw_match[] = {
>         { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
> +       { .compatible = "qcom,sm8250-epss", .data = &sm8250_soc_data },
>         {}
>  };
>  MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
> --
> 2.17.1
>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux