Re: [PATCH V1] arm64: dts: qcom: Add bandwidth votes for eMMC and SDcard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 17 Jul 23:33 PDT 2020, Shaik Sajida Bhanu wrote:

Plase add "sc7180: " between "qcom:" and "Add"

> From: Pradeep P V K <ppvk@xxxxxxxxxxxxxx>
> 
> Add the bandwidth domain supporting performance state and
> the corresponding OPP tables for the sdhc device on sc7180.
> 

You need Pradeep's signed-off-by here before yours.

> Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
> ---
> This change is depends on the patch series
> https://lkml.org/lkml/2020/6/30/1280
> Also depends on documentation commit 557ed5f (Present on linux-next)

Afaict both of these exists in linux-next, so no need to mention them.


Would be nice to have Rajendra's ack/reviewed-by on this patch, as
you're amending his. Please Cc him.

The change itself looks good to me though.

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 68f9894..d78a066 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -684,6 +684,9 @@
>  			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
>  					<&gcc GCC_SDCC1_AHB_CLK>;
>  			clock-names = "core", "iface";
> +			interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
> +				<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
> +			interconnect-names = "sdhc-ddr","cpu-sdhc";
>  			power-domains = <&rpmhpd SC7180_CX>;
>  			operating-points-v2 = <&sdhc1_opp_table>;
>  
> @@ -704,11 +707,15 @@
>  				opp-100000000 {
>  					opp-hz = /bits/ 64 <100000000>;
>  					required-opps = <&rpmhpd_opp_low_svs>;
> +					opp-peak-kBps = <100000 100000>;
> +					opp-avg-kBps = <100000 50000>;
>  				};
>  
>  				opp-384000000 {
>  					opp-hz = /bits/ 64 <384000000>;
>  					required-opps = <&rpmhpd_opp_svs_l1>;
> +					opp-peak-kBps = <600000 900000>;
> +					opp-avg-kBps = <261438 300000>;
>  				};
>  			};
>  		};
> @@ -2476,6 +2483,10 @@
>  			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
>  					<&gcc GCC_SDCC2_AHB_CLK>;
>  			clock-names = "core", "iface";
> +
> +			interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> +				<&gem_noc MASTER_APPSS_PROC &config_noc	SLAVE_SDCC_2>;
> +			interconnect-names = "sdhc-ddr","cpu-sdhc";
>  			power-domains = <&rpmhpd SC7180_CX>;
>  			operating-points-v2 = <&sdhc2_opp_table>;
>  
> @@ -2489,11 +2500,15 @@
>  				opp-100000000 {
>  					opp-hz = /bits/ 64 <100000000>;
>  					required-opps = <&rpmhpd_opp_low_svs>;
> +					opp-peak-kBps = <160000 100000>;
> +					opp-avg-kBps = <80000 50000>;
>  				};
>  
>  				opp-202000000 {
>  					opp-hz = /bits/ 64 <202000000>;
>  					required-opps = <&rpmhpd_opp_svs_l1>;
> +					opp-peak-kBps = <200000	120000>;
> +					opp-avg-kBps = <100000 60000>;
>  				};
>  			};
>  		};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux