[PATCH V1] arm64: dts: qcom: SD-card GPIO pin set bias-pull up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>

On some sc7180 based platforms where external pull is not present on cd-gpio,
this gpio state is getting read as HIGH when sleep config is applied on it.
This is resulting in SDcard rescan after suspend-resume even though SDcard
is not present.

Update cd-gpio sleep config with bais-pull to fix this issue.

Also include xo clock to sdhc clocks list which will be used
in calculating MCLK_FREQ field of DLL_CONFIG2 register.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d78a066..8034fcc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -682,8 +682,9 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-					<&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+					<&gcc GCC_SDCC1_AHB_CLK>,
+					<&xo_board>;
+			clock-names = "core", "iface", "xo";
 			interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
 				<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
 			interconnect-names = "sdhc-ddr","cpu-sdhc";
@@ -1819,7 +1820,7 @@
 
 				pinconf-sd-cd {
 					pins = "gpio69";
-					bias-disable;
+					bias-pull-up;
 					drive-strength = <2>;
 				};
 			};
@@ -2481,8 +2482,9 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-					<&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+					<&gcc GCC_SDCC2_AHB_CLK>,
+					<&xo_board>;
+			clock-names = "core", "iface", "xo";
 
 			interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
 				<&gem_noc MASTER_APPSS_PROC &config_noc	SLAVE_SDCC_2>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux