Re: [PATCH 4/6] interconnect: qcom: Add SM8250 interconnect provider driver

[Jonathan Marek <jonathan@xxxxxxxx>]

On 7/13/20 9:30 AM, Georgi Djakov wrote:
> Hi Jonathan,
>
> Thanks for posting these patches!
>
> On 7/1/20 16:42, Jonathan Marek wrote:
> > Add driver for the Qualcomm interconnect buses found in SM8250 based
> > platforms. The topology consists of several NoCs that are controlled by
> > a remote processor that collects the aggregated bandwidth for each
> > master-slave pairs.
> >
> > Based on SC7180 driver and generated from downstream dts.
> >
> > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> > ---
> [..]
> > +
> > +static const struct of_device_id qnoc_of_match[] = {
> > +	{ .compatible = "qcom,sm8250-aggre1-noc",
> > +	  .data = &sm8250_aggre1_noc},
> > +	{ .compatible = "qcom,sm8250-aggre2-noc",
> > +	  .data = &sm8250_aggre2_noc},
> > +	{ .compatible = "qcom,sm8250-compute-noc",
> > +	  .data = &sm8250_compute_noc},
> > +	{ .compatible = "qcom,sm8250-config-noc",
> > +	  .data = &sm8250_config_noc},
> > +	{ .compatible = "qcom,sm8250-dc-noc",
> > +	  .data = &sm8250_dc_noc},
> > +	{ .compatible = "qcom,sm8250-gem-noc",
> > +	  .data = &sm8250_gem_noc},
> > +	{ .compatible = "qcom,sm8250-ipa-virt",
> > +	  .data = &sm8250_ipa_virt},
> > +	{ .compatible = "qcom,sm8250-mc-virt",
> > +	  .data = &sm8250_mc_virt},
> > +	{ .compatible = "qcom,sm8250-mmss-noc",
> > +	  .data = &sm8250_mmss_noc},
> > +	{ .compatible = "qcom,sm8250-npu-noc",
> > +	  .data = &sm8250_npu_noc},
> > +	{ .compatible = "qcom,sm8250-system-noc",
> > +	  .data = &sm8250_system_noc},
> > +	{ .compatible = "qcom,sm8250-gem-noc-display",
> > +	  .data = &sm8250_gem_noc_display},
> > +	{ .compatible = "qcom,sm8250-mc-virt-display",
> > +	  .data = &sm8250_mc_virt_display},
> > +	{ .compatible = "qcom,sm8250-mmss-noc-display",
> > +	  .data = &sm8250_mmss_noc_display},
> > +	{ }
>
> My main concern here are the display RSC nodes. We should not add the nodes
> for voting on the display RSC, but use the "qcom,bcm-voters" property in DT
> to list both "hlos" and "disp" as bcm voters for gem-noc, mc-virt and
> mmss-noc.

Would it be OK to just drop the display RSC parts from this series then? 
Not sure if anything needs it to work, but I'm not using it currently.

Though if you can provide details for a solution, I could implement it 
(qcom_icc_provider needs to have a list of voters, but I'm not sure how 
to deal with everything else).

> Thanks,
> Georgi