Most of this is generated from downstream dts using a script. There are a couple things I'm not sure about: * When to set keepalive in DEFINE_QBCM macro (set to all false) * Address/size for the reg fields - the "display" nodes have the same address as the non-"display" nodes. For the size I just used 0x1000. reg field is unused by the upstream driver so isn't a problem functionally. Jonathan Marek (6): dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings dt-bindings: interconnect: Add Qualcomm SM8250 DT bindings interconnect: qcom: Add SM8150 interconnect provider driver interconnect: qcom: Add SM8250 interconnect provider driver arm64: dts: qcom: sm8150: add interconnect nodes arm64: dts: qcom: sm8250: add interconnect nodes .../bindings/interconnect/qcom,sm8150.yaml | 86 ++ .../bindings/interconnect/qcom,sm8250.yaml | 86 ++ arch/arm64/boot/dts/qcom/sm8150.dtsi | 118 +++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 118 +++ drivers/interconnect/qcom/Kconfig | 20 + drivers/interconnect/qcom/Makefile | 4 + drivers/interconnect/qcom/sm8150.c | 719 +++++++++++++++++ drivers/interconnect/qcom/sm8150.h | 163 ++++ drivers/interconnect/qcom/sm8250.c | 733 ++++++++++++++++++ drivers/interconnect/qcom/sm8250.h | 173 +++++ .../dt-bindings/interconnect/qcom,sm8150.h | 176 +++++ .../dt-bindings/interconnect/qcom,sm8250.h | 186 +++++ 12 files changed, 2582 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sm8150.yaml create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sm8250.yaml create mode 100644 drivers/interconnect/qcom/sm8150.c create mode 100644 drivers/interconnect/qcom/sm8150.h create mode 100644 drivers/interconnect/qcom/sm8250.c create mode 100644 drivers/interconnect/qcom/sm8250.h create mode 100644 include/dt-bindings/interconnect/qcom,sm8150.h create mode 100644 include/dt-bindings/interconnect/qcom,sm8250.h -- 2.26.1
