Hi,
On 7/9/20 11:12 PM, Doug Anderson wrote:
root@c630:~# bus=$(i2cdetect -l | grep sn65 | sed 's/i2c-\([0-9]*\).*$/\1/')
root@c630:~# i2cdump ${bus} 0x50 i > edid
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-16, address 0x50, mode i2c block
Continue? [Y/n]
root@c630:~# edid-decode edid
edid-decode (hex):
00 ff ff ff ff ff ff 00 09 e5 d1 07 00 00 00 00
01 1c 01 04 a5 1d 11 78 0a 1d b0 a6 58 54 9e 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 c0 39 80 18 71 38 28 40 30 20
36 00 26 a5 10 00 00 1a 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 1a 00 00 00 fe 00 42
4f 45 20 43 51 0a 20 20 20 20 20 20 00 00 00 fe
00 4e 56 31 33 33 46 48 4d 2d 4e 36 31 0a 00 9a
03 26 0a 77 ab 1c 05 71 6f 1d 8c f1 43 ce 6a bb
fb d3 11 20 39 07 22 6e 65 68 77 70 d3 05 34 73
44 21 8b fd f5 6d 11 62 94 2a 7c fa 93 ba 6a 61
92 da 15 53 4c 39 eb f7 86 23 97 48 e9 39 09 d2
66 02 70 bb e2 77 0f 4a a3 a0 4c 72 6e 5d 47 70
43 c2 13 f3 b2 d9 b9 78 02 be 41 82 15 6a 28 dc
45 0f 9d eb 0f 2a cc e8 35 8d 34 7f 3e 84 5e a3
30 5e 1e 29 0a 48 0c d1 0a c4 08 31 03 a9 3b 29
----------------
EDID version: 1.4
Manufacturer: BOE Model 2001 Serial Number 0
Made in week 1 of 2018
Digital display
8 bits per primary color channel
DisplayPort interface
Maximum image size: 29 cm x 17 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4, YCrCb 4:4:4
First detailed timing includes the native pixel format and preferred
refresh rate
Color Characteristics
Red: 0.6484, 0.3447
Green: 0.3310, 0.6181
Blue: 0.1503, 0.0615
White: 0.3125, 0.3281
Established Timings I & II: none
Standard Timings: none
Detailed mode: Clock 147.840 MHz, 294 mm x 165 mm
1920 1968 2000 2200 ( 48 32 200)
1080 1083 1089 1120 ( 3 6 31)
+hsync -vsync
VertFreq: 60.000 Hz, HorFreq: 67.200 kHz
Manufacturer-Specified Display Descriptor (0x00): 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 1a ................
Alphanumeric Data String: BOE CQ
Alphanumeric Data String: NV133FHM-N61
Checksum: 0x9a
----------------
Unknown EDID Extension Block 0x03
03 26 0a 77 ab 1c 05 71 6f 1d 8c f1 43 ce 6a bb .&.w...qo...C.j.
fb d3 11 20 39 07 22 6e 65 68 77 70 d3 05 34 73 ... 9."nehwp..4s
44 21 8b fd f5 6d 11 62 94 2a 7c fa 93 ba 6a 61 D!...m.b.*|...ja
92 da 15 53 4c 39 eb f7 86 23 97 48 e9 39 09 d2 ...SL9...#.H.9..
66 02 70 bb e2 77 0f 4a a3 a0 4c 72 6e 5d 47 70 f.p..w.J..Lrn]Gp
43 c2 13 f3 b2 d9 b9 78 02 be 41 82 15 6a 28 dc C......x..A..j(.
45 0f 9d eb 0f 2a cc e8 35 8d 34 7f 3e 84 5e a3 E....*..5.4.>.^.
30 5e 1e 29 0a 48 0c d1 0a c4 08 31 03 a9 3b 29 0^.).H.....1..;)
Checksum: 0x29 (should be 0x82)
- My edid does in fact say it's 8bit
Crazy! Mine:
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 09 e5 2d 08 00 00 00 00 23 1c
version: 01 04
basic params: 95 1d 11 78 02
chroma info: d5 00 a6 58 54 9f 27 0f 4f 57
established: 00 00 00
standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: c0 39 80 18 71 38 28 40 30 20 36 00 26 a5 10 00 00 1a
descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 3: 00 00 00 fe 00 42 4f 45 20 43 51 0a 20 20 20 20 20 20
descriptor 4: 00 00 00 fe 00 4e 56 31 33 33 46 48 4d 2d 4e 36 32 0a
extensions: 00
checksum: 40
Manufacturer: BOE Model 82d Serial Number 0
Made week 35 of 2018
EDID version: 1.4
Digital display
6 bits per primary color channel
DisplayPort interface
Maximum image size: 29 cm x 17 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4
First detailed timing is preferred timing
Established timings supported:
Standard timings supported:
Detailed mode: Clock 147.840 MHz, 294 mm x 165 mm
1920 1968 2000 2200 hborder 0
1080 1083 1089 1120 vborder 0
+hsync -vsync
Manufacturer-specified data, tag 0
ASCII string: BOE
ASCII string: NV133FHM-N62
Checksum: 0x40 (valid)
Unknown extension block
EDID block does NOT conform to EDID 1.3!
Missing name descriptor
Missing monitor ranges
Detailed block string not properly terminated
EDID block does not conform at all!
Has 128 nonconformant extension block(s)
I did attempt to modify the patch, and I don't think I did it correctly
Around line 232, I changed
IS_SC7180_TARGET(c->hw.hwversion))
to
IS_SC7180_TARGET(c->hw.hwversion) ||
IS_SDM845_TARGET(c->hw.hwversion))
But it would seem that only gets us 1/2 way there...
https://dev.gentoo.org/~steev/files/image2.jpg
But should I continue on this path, or should we be finding others who
have an N61 and see what their EDID reports?
I have another c630, but unfortunately, it appears to have the IVO
screen in it, instead of another N61. I asked another user and he also
had the IVO.
-- steev
