Re: [PATCH v3 6/9] drm/bridge: ti-sn65dsi86: Use 18-bit DP if we can

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Jul 9, 2020 at 6:19 PM Steev Klimaszewski <steev@xxxxxxxxxx> wrote:
>
> Hi Doug,
>
> I've been testing 5.8 and linux-next on the Lenovo Yoga C630, and with this patch applied, there is really bad banding on the display.
>
> I'm really bad at explaining it, but you can see the differences in the following:
>
> 24bit (pre-5.8) - https://dev.gentoo.org/~steev/files/image0.jpg
>
> 18bit (5.8/linux-next) - https://dev.gentoo.org/~steev/files/image1.jpg

Presumably this means that your panel is defined improperly?  If the
panel reports that it's a 6 bits per pixel panel but it's actually an
8 bits per pixel panel then you'll run into this problem.

I would have to assume you have a bunch of out of tree patches to
support your hardware since I don't see any device trees in linuxnext
(other than cheza) that use this bridge chip.  Otherwise I could try
to check and confirm that was the problem.

-Doug



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux