[PATCH 3/6] dt-bindings: thermal: tsens: document ipq8064 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document the use of regmap phandle for ipq8064 SoCs

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 .../bindings/thermal/qcom-tsens.yaml          | 51 ++++++++++++++++---
 1 file changed, 44 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d7be931b42d2..5ceb5d720e16 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -24,6 +24,7 @@ properties:
           - enum:
               - qcom,msm8916-tsens
               - qcom,msm8974-tsens
+              - qcom,ipq8064-tsens
           - const: qcom,tsens-v0_1
 
       - description: v1 of TSENS
@@ -47,6 +48,11 @@ properties:
       - description: TM registers
       - description: SROT registers
 
+  regmap:
+    description:
+      Phandle to the gcc. On ipq8064 SoCs gcc and tsense share the same regs.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   interrupts:
     minItems: 1
     items:
@@ -111,17 +117,48 @@ allOf:
         interrupt-names:
           minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8064-tsens
+    then:
+      required:
+        - compatible
+        - regmap
+        - "#qcom,sensors"
+        - interrupts
+        - interrupt-names
+        - "#thermal-sensor-cells"
+
+    else:
+      required:
+        - compatible
+        - reg
+        - "#qcom,sensors"
+        - interrupts
+        - interrupt-names
+        - "#thermal-sensor-cells"
 
 additionalProperties: false
 
 examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    tsens: thermal-sensor@900000 {
+           compatible = "qcom,ipq8064-tsens";
+           regmap = <&gcc>;
+
+           nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+           nvmem-cell-names = "calib", "calib_backup";
+
+           interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+
+           #thermal-sensor-cells = <1>;
+    };
+
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux