It is helpful to be able to see all hardware components in one part
of the device tree, without having to scroll over the large amount
of regulator/pinctrl nodes. Keep those separated at the end of the file
to make navigation a bit easier.
This also makes it consistent with the order used in apq8016-sbc.dtsi.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 50 +++---
.../qcom/msm8916-samsung-a2015-common.dtsi | 158 +++++++++---------
2 files changed, 104 insertions(+), 104 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d5230cb76eb1..ed105e06c3fc 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -108,31 +108,6 @@ volume-up {
};
};
-&msmgpio {
- gpio_keys_default: gpio-keys-default {
- pinmux {
- function = "gpio";
- pins = "gpio107";
- };
- pinconf {
- pins = "gpio107";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- usb_vbus_default: usb-vbus-default {
- pinmux {
- function = "gpio";
- pins = "gpio62";
- };
- pinconf {
- pins = "gpio62";
- bias-pull-up;
- };
- };
-};
-
&spmi_bus {
pm8916@0 {
pon@800 {
@@ -258,3 +233,28 @@ l18 {
regulator-max-microvolt = <2700000>;
};
};
+
+&msmgpio {
+ gpio_keys_default: gpio-keys-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio107";
+ };
+ pinconf {
+ pins = "gpio107";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb_vbus_default: usb-vbus-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio62";
+ };
+ pinconf {
+ pins = "gpio62";
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index ea52adf07a4b..b20c1013612f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -167,77 +167,14 @@ muic: sm5502@25 {
};
};
-&msmgpio {
- gpio_keys_default: gpio-keys-default {
- pinmux {
- function = "gpio";
- pins = "gpio107", "gpio109";
- };
- pinconf {
- pins = "gpio107", "gpio109";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- gpio_hall_sensor_default: gpio-hall-sensor-default {
- pinmux {
- function = "gpio";
- pins = "gpio52";
- };
- pinconf {
- pins = "gpio52";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- muic_int_default: muic-int-default {
- pinmux {
- function = "gpio";
- pins = "gpio12";
- };
- pinconf {
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- tsp_en_default: tsp-en-default {
- pinmux {
- function = "gpio";
- pins = "gpio73";
- };
- pinconf {
- pins = "gpio73";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pmx-mdss {
- mdss_default: mdss-default {
- pinmux {
- function = "gpio";
- pins = "gpio25";
- };
- pinconf {
- pins = "gpio25";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- mdss_sleep: mdss-sleep {
- pinmux {
- function = "gpio";
- pins = "gpio25";
- };
- pinconf {
- pins = "gpio25";
- drive-strength = <2>;
- bias-pull-down;
+&spmi_bus {
+ pm8916@0 {
+ pon@800 {
+ volume-down {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
};
};
};
@@ -356,15 +293,78 @@ l18 {
};
};
-&spmi_bus {
- pm8916@0 {
- pon@800 {
- volume-down {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
+&msmgpio {
+ gpio_keys_default: gpio-keys-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio107", "gpio109";
+ };
+ pinconf {
+ pins = "gpio107", "gpio109";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio52";
+ };
+ pinconf {
+ pins = "gpio52";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mdss {
+ mdss_default: mdss-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio25";
+ };
+ pinconf {
+ pins = "gpio25";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ mdss_sleep: mdss-sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio25";
};
+ pinconf {
+ pins = "gpio25";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+ };
+
+ muic_int_default: muic-int-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio12";
+ };
+ pinconf {
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ tsp_en_default: tsp-en-default {
+ pinmux {
+ function = "gpio";
+ pins = "gpio73";
+ };
+ pinconf {
+ pins = "gpio73";
+ drive-strength = <2>;
+ bias-disable;
};
};
};
--
2.27.0
